G.SKILL F4-3600C18D-16GTRG 16GB DDR4 3600 CL18 desktop RAM
- 16GB (2 x 8GB)
- DDR4 3600 (PC4 2880…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
G.SKILL
16 GB dual-channel DDR4 kit at 3000 MHz CL16 with crystalline RGB light bar and silver mirror-finish heatspreaders
Capacity 16GB (2 x 8GB)
Speed DDR4 3000 (PC4 24000)
Color Silver
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
This 16GB kit delivers two 8GB DDR4 modules rated at 3000 MT/s with CL16 timings. It targets builders who want strong RGB presence and verified dual-channel performance on mainstream desktop platforms.
CNC-cut aluminum heatspreaders in a mirrored silver finish use the classic tri-fin layout to move heat away from hand-screened ICs. The kit runs at a tested 1.35V, keeping power draw modest during typical gaming or productivity workloads.
The modules replace slower DDR4 sticks or single-channel configurations on boards that support XMP 3000 profiles. The jump is worthwhile when your current memory limits frame rates or multitasking headroom at this voltage and timing.
| Brand | G.SKILL |
|---|---|
| Series | Trident Z Royal Series |
| Model | F4-3000C16D-16GTRS |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3000 (PC4 24000) |
| CAS Latency | CL16 |
| Timing | 16-18-18-38 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Silver |
| Heat Spreader | Yes |
| Features | Unique crystalline light bar design. Mirrored-finish aluminum heatspreaders in gold or silver. Fluid rainbow wave default lighting effect. Hand-screened IC & custom 10-layer PCB for improved overclock performance. Intel XMP 2.0 Support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP |
| Recommend Use | AMD X570 Intel X299 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270 |
| LED Color | RGB |
| Lähetyspaino | 0.25 kg |
| Pakkauksen mitat | 229 × 132 × 20 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Align the notch on each 288-pin module with the slot key, press firmly until both retention clips click, and populate the two slots your motherboard manual designates for dual-channel operation.
Dust the light bar and heatspreader fins occasionally with compressed air; no liquid cleaners or disassembly are needed.
Stability is bound by the rated 1.35 V and CL16 16-18-18-38 timings; exceeding either voltage or tighter timings typically causes errors first.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?