Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Eight black DDR5 RDIMM modules in a row

G.SKILL

G.SKILL Zeta R5 128GB (8 x 16GB) DDR5 6000 CL30 ECC Registered RDIMM F5-6000R3039G16GE8-ZR5K

SKU CH-GN6H-QR6WY MPN F5-6000R3039G16GE8-ZR5K

128 GB kit of eight 16 GB DDR5 RDIMMs running at 6000 MT/s with CL30 latency, ECC and registered buffering for Xeon W-3400X workstations

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6000 (PC5 48000)
  • CAS LatencyCL30
  • Timing30-39-39-96
  • Voltage1.40V

Capacity 128GB (8 x 16GB)

Speed DDR5 6000 (PC5 48000)

  • 128 GB total capacity across eight 16 GB modules
  • DDR5 6000 speed with CL30 latency for fast data handling
  • ECC registered design protects data integrity in critical workloads
  • Intel XMP 3.0 support enables simple overclocking on compatible platforms
  • Optimised for Xeon W-3400X processors and W790 chipset

128GB DDR5 RDIMM kit for workstations

This kit provides 128GB of registered ECC memory across eight 16GB modules. It is built for compatible Intel Xeon W-3400X workstation platforms that require registered DIMMs with error correction. The modules operate at DDR5 6000 with a CL30 latency profile. Buyers needing unbuffered UDIMMs or non-ECC memory should look elsewhere.

Registered ECC with 288-pin DDR5 interface

Each module is a 288-pin DDR5 RDIMM rated at 6000 MT/s (PC5 48000) with timings of 30-39-39-96 at 1.40V. The registered buffer and on-die ECC plus side-band ECC are the single specification that determines compatibility; the motherboard must support registered ECC DDR5 and the W790 chipset with eight-channel architecture. Systems without registered memory support cannot use this kit.

Fits Intel W790 octo-channel workstations

The eight-module population fills all channels on a W790 motherboard designed for Xeon W-3400X processors. Intel XMP 3.0 profiles simplify configuration when the platform allows overclocked memory operation. Dedicated on-module temperature sensors assist thermal monitoring. Builders using consumer chipsets, fewer than eight channels, or unbuffered memory slots cannot install this product.

Kohokohdat

  • 128 GB total capacity across eight 16 GB modules
  • DDR5 6000 speed with CL30 latency for fast data handling
  • ECC registered design protects data integrity in critical workloads
  • Intel XMP 3.0 support enables simple overclocking on compatible platforms
  • Optimised for Xeon W-3400X processors and W790 chipset

Tekniset tiedot

BrandG.SKILL
SeriesZeta R5 Series
ModelF5-6000R3039G16GE8-ZR5K
Capacity128GB (8 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6000 (PC5 48000)
CAS LatencyCL30
Timing30-39-39-96
Voltage1.40V
ECCYes
Buffered/RegisteredRegistered
FeaturesZeta R5 series memory kits are overclocked performance DDR5 R-DIMM memory designed for
use in compatible workstation systems. Featuring Intel XMP 3.0 and ECC support, the Zeta R5
series is the ultimate overclocked performance memory solution for high-end workstations
platforms
• Optimized for Intel Xeon W-3400X series processors
• Requires compatible Intel W790 chipset motherboard w/ 8-channel support
• On-die ECC & side-band ECC
• Dedicated temperature sensors
• Intel XMP 3.0 Support
Lähetyspaino0.41 kg
Pakkauksen mitat244 × 178 × 38 mm

Tämän mallin muut versiot

2 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What does the DDR5 6000 speed rating mean when the kit is installed in a workstation?

The kit runs at 6000 MT/s with CL30-39-39-96 timings at 1.40 V when the XMP 3.0 profile is enabled on a compatible Intel W790 motherboard.

How does the registered DDR5 interface with ECC affect data integrity and throughput?

The RDIMM modules include on-die ECC and side-band ECC, providing error correction for each 16 GB module while the register buffers address and command signals for stable octo-channel operation.

What physical slot and motherboard layout are required for the 8-module kit?

The kit uses 288-pin DDR5 RDIMM modules and requires an Intel W790 chipset motherboard with eight memory slots to populate all 8 x 16 GB modules.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.