Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Three black 120mm fans with infinity mirrors and swappable blades

GAMDIAS Technology

GAMDIAS Technology AEOLUS P2 120 3-Pack 120mm ARGB Case Fan

SKU CH-KCFQ-8F52M

Three 120 mm ARGB case fans with cableless daisy-chain mounting, swappable blades, dual infinity mirrors and hydraulic bearings move 74.97 CFM at up to 2400 RPM

  • Fan Counts3 Fans
  • TypeCase Fan
  • Compatibility5v 3pin
  • Fan Thickness30mm
  • Bearing TypeHydraulic
  • RPM2400
  • Cableless daisy-chaining simplifies installation and reduces cable clutter
  • Swappable fan blades enable push or pull airflow without extra parts
  • Dual infinity mirrors with 32 ARGB LEDs illuminate both sides of each fan
  • Hydraulic bearing supports 2400 RPM while keeping noise low
  • 97 CFM airflow at 3.1 mmH2O pressure cools cases efficiently

Three-Fan ARGB Kit for 120mm Mounts

This kit supplies three 120mm ARGB case fans with a 30mm thickness and hydraulic bearings. A cableless daisy-chain design links the fans together while a separate power kit feeds the chain. Builders wanting synchronized lighting and push-pull flexibility in standard 120mm locations are the target audience.

PWM Range and 5V ARGB Header Limits

Speed is controlled through a 4-pin PWM connector across a 1000 to 2400 RPM range, delivering 74.97 CFM airflow and 3.1 mmH2O static pressure. The addressable LEDs require a motherboard 5V 3-pin header; systems lacking that header cannot drive the lighting without an external controller.

Cableless Daisy-Chain

Fans snap together without cables, reducing internal clutter, and each unit includes reverse blades for quick push-pull conversion. The 30mm frame may not fit slim chassis or tight radiator stacks, and a single power kit powers only one daisy chain — additional kits are needed for separate zones.

Kohokohdat

  • Cableless daisy-chaining simplifies installation and reduces cable clutter
  • Swappable fan blades enable push or pull airflow without extra parts
  • Dual infinity mirrors with 32 ARGB LEDs illuminate both sides of each fan
  • Hydraulic bearing supports 2400 RPM while keeping noise low
  • 97 CFM airflow at 3.1 mmH2O pressure cools cases efficiently

Tekniset tiedot

BrandGAMDIAS
SeriesAEOLUS
Fan Counts3 Fans
TypeCase Fan
Compatibility5v 3pin
Fan Thickness30mm
Bearing TypeHydraulic
RPM2400
Air Flow74.97 CFM
Air Pressure3.1 mmH2O
Power Connector4 Pin PWM
ColorBlack
LEDARGB

Kysymyksiä tästä tuotteesta

Should I pick the 3-pack or buy single fans for my case?

The 3-pack includes three 120 mm fans, one power kit and a lighting controller, so you can populate front, top and rear positions in one purchase.

What does the 74.97 CFM airflow figure deliver inside a build?

At 2400 RPM the fans move 74.97 CFM with 3.1 mmH2O pressure, giving strong intake or exhaust performance through restrictive mesh or radiators.

How does the 5 V 3-pin ARGB header limit lighting control?

The 32 LED infinity mirror arrays sync via a 5 V 3-pin addressable header, so colour and effects are managed through your motherboard software.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.