Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

GAMDIAS Technology

GAMDIAS Technology ATLAS M3M PC Case

SKU CH-4ZE1-EWRVD MPN ATLAS M3M

A dual-chamber micro-tower with three-sided columnless tempered glass, three built-in ARGB fans, an 8-port PWM ARGB hub and angled airflow for GPUs up to 400 mm

  • Case MaterialABS / Aluminum / Steel
  • Motherboard CompatibilityMicro ATX
  • Side Panel3 x Sides Tempered Glass Panel

Option ATLAS M3M

  • Three-sided columnless tempered glass for an immersive build view
  • 3 built-in NOTUS M1 ARGB fans with 8-port PWM ARGB hub for lighting control
  • Unique angled airflow design directs air straight to the GPU
  • Supports Micro-ATX and Mini-ITX plus connector-hidden motherboards
  • Fits graphics cards up to 400mm for high-end performance

Micro-ATX Dual-Chamber Case

The ATLAS M3M is a dual-chamber micro-tower built for Micro-ATX and Mini-ITX motherboards. Three-sided columnless tempered glass panels give a full view of the interior. It also supports connector-hidden motherboards for a cleaner cable presentation.

Angled GPU Airflow and Fan Hub

A unique angled fan mounting system directs airflow straight toward the graphics card, supporting models up to 400 mm long. Three pre-installed NOTUS M1 ARGB fans include two reverse intake units, and an 8-port PWM ARGB hub handles lighting and speed synchronisation. Perforated vents on the side, front and rear complete the ventilation path.

For Compact Showcase Builds

This case suits builders who want a compact showcase with strong GPU cooling and simplified cable routing. It is not for anyone needing ATX or E-ATX motherboard support, multiple 3.5-inch drive bays, or a traditional single-chamber layout.

Kohokohdat

  • Three-sided columnless tempered glass for an immersive build view
  • 3 built-in NOTUS M1 ARGB fans with 8-port PWM ARGB hub for lighting control
  • Unique angled airflow design directs air straight to the GPU
  • Supports Micro-ATX and Mini-ITX plus connector-hidden motherboards
  • Fits graphics cards up to 400mm for high-end performance

Tekniset tiedot

Case MaterialABS / Aluminum / Steel
Motherboard CompatibilityMicro ATX
Side Panel3 x Sides Tempered Glass Panel
Lähetyspaino6.94 kg
Pakkauksen mitat514 × 445 × 371 mm

Tämän mallin muut versiot

3 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How long a graphics card fits inside the ATLAS M3M?

The case accepts graphics cards up to 400 mm long, so most current dual-slot and triple-slot models will install without hitting the front panel or the angled fan brackets.

What noise and temperature levels should I expect when the three built-in NOTUS M1 ARGB fans run all day?

The three pre-installed NOTUS M1 ARGB fans connect to the included 8-port PWM ARGB hub, letting the motherboard regulate speed by temperature; under typical loads they run quietly, and the perforated side, front and rear vents let heat escape so internal temperatures stay stable during long sessions.

Which motherboards and front-panel connectors must I already have for this case to work?

You need a Micro-ATX or Mini-ITX board — standard or connector-hidden — plus an internal USB 3.2 Gen 2 Type-C header on that board to activate the front-panel Type-C port; the 8-port PWM ARGB hub also requires a 5 V ARGB header and a PWM fan header for full lighting and speed control.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.