Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
A compact black transmitter and receiver pair with HDMI ports and dual-band antennas

Gefen MD-05-01 Wireless HDMI Extender 1080P 165ft 2.4/5.8GHz

SKU CH-YWQZ-TKCXH

Wirelessly transmits 1080P video up to 165 feet using dual-band 2.4 and 5.8 GHz with latency under .01 seconds

  • Extender & Repeater TypeReceiver
  • Wireless Supporttrue
  • Resolution Support4K
  • VideoUse Cases:Office & classrooms/Churches & events/Trade-shows
  • Network Interfaceradio_frequency
  • Component1 In
  • Wireless freedom up to 165 ft indoors with dual-band 2.4/5.8 GHz signal
  • Near-zero latency under 0.01 s keeps video and audio perfectly in sync
  • 4K decode input scaled to 1080p at 60 Hz for crisp presentations
  • Plug-and-play auto-pair needs no Wi-Fi, apps or drivers
  • Receiver powered during use; transmitter draws power from most computers

Wireless HDMI extender for presentations and events

The Gefen MD-05-01 transmits HDMI video and audio wirelessly up to 165 ft indoors or 328 ft in open space. It accepts a 4K input signal and delivers 1080p at 60 Hz output. The kit suits offices, classrooms, churches, trade shows and home movie nights where running cables is impractical.

Dual-band radio sustains link through walls

The system operates on 2.4 GHz and 5.8 GHz bands with automatic pairing and no Wi-Fi network required. Latency stays below 0.01 s for presentations and video playback. The connection remains stable through obstacles, though range and speed decrease when signals pass through walls. Gaming that demands the lowest latency is not recommended.

Receiver needs continuous power during use

The receiver must be powered while operating; most computers can supply the transmitter over HDMI, but an external charge may be needed if voltage drops. The units measure 14.33 in wide, 12.83 in high and 9.06 in deep. No drivers, apps or Bluetooth are involved, keeping daily setup to a simple plug-and-play routine.

Kohokohdat

  • Wireless freedom up to 165 ft indoors with dual-band 2.4/5.8 GHz signal
  • Near-zero latency under 0.01 s keeps video and audio perfectly in sync
  • 4K decode input scaled to 1080p at 60 Hz for crisp presentations
  • Plug-and-play auto-pair needs no Wi-Fi, apps or drivers
  • Receiver powered during use; transmitter draws power from most computers

Tekniset tiedot

BrandGefen
SeriesMD-05-01
ModelMD-05-01
Part NumberMD-05-01
Extender & Repeater TypeReceiver
Wireless Supporttrue
Resolution Support4K
VideoUse Cases:Office & classrooms/Churches & events/Trade-shows & demos/Bars & sports venues, Warehouses & training/Live streaming setups/Home & outdoor movies/Travel & hotels/Cameras & gaming
Network Interfaceradio_frequency
Component1 In
SoftwareDual-band 2.4/5 GHz,Low-latency,No Wi-Fi or app required,No drivers required,Auto-pair
Displaywithout screen, touch
System Requirementsradio_frequency
Specification1 L x 1 W x 1 H inches, radio_frequency, 1
Dimensions14.33in W x 12.83in H x 9.06in D
Package Content1, false

Kysymyksiä tästä tuotteesta

Does the dual-band 2.4/5.8 GHz wireless link add noticeable heat or power draw when streaming 1080P@60Hz all day?

The kit runs on low power from USB or a 5 V supply; the transmitter draws from the source device and the receiver needs its own charge, but neither unit produces significant heat during continuous 1080P@60Hz transmission.

What power sources must I already have to run the transmitter and receiver?

The transmitter can be powered by most computer HDMI ports, while the receiver requires a separate USB power adapter or power bank; both use standard 5 V USB connections.

Will the extender pass 4K HDR metadata through to my older 1080P projector?

The system decodes a 4K input signal but outputs only 1080P@60Hz, so HDR metadata is not passed to a 1080P display.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.