NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
GIGABYTE
Liquid-cooled RTX 5090 GPU with 32 GB GDDR7 memory, 21760 CUDA cores, 512-bit bus, PCIe 5.0 and DLSS 4.5 support
The GIGABYTE AORUS GeForce RTX 5090 XTREME WATERFORCE 32G is a liquid-cooled graphics card built around the NVIDIA Blackwell architecture. It delivers 32GB of GDDR7 memory on a 512-bit bus with a 2655 MHz core clock. The integrated WATERFORCE all-in-one cooler uses a 360mm radiator, three 120mm ARGB fans, liquid metal thermal grease and server-grade thermal gel. It targets enthusiasts and professionals who need maximum GPU compute and memory capacity for 4K or 8K workloads.
This card replaces any air-cooled RTX 40-series or earlier flagship when thermal headroom and memory capacity are the limiting factors. The jump is worth it if your current GPU hits temperature limits, lacks the 32GB frame buffer for large datasets or cannot saturate a PCIe 5.0 x16 link. The 28 Gbps memory speed and 21760 CUDA cores provide a measurable uplift for rasterisation, ray-traced rendering and AI inference workloads that exceed 24GB VRAM.
Verify your case can mount a 360mm radiator with 460mm tube routing clearance. Confirm the power supply delivers at least 1000W and includes a native 12V-2x6 connector or use the supplied 12V-2x6 to 4x PCIe 8-pin adapter. Ensure the motherboard provides a PCIe 5.0 x16 slot and that the 245mm card length fits without obstructing other components. Check DisplayPort 2.1b or HDMI 2.1b monitor compatibility for 7680x4320 output.
Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.
The card measures 245 mm long, 146 mm wide and 36 mm thick. The 360 mm radiator needs three 120 mm fan mounts. Tubes are 460 mm long with a 1.5 % tolerance, so measure your case clearance and radiator mounting points before buying.
Plug the single 16 pin connector directly into the card. Use the included 12V-2x6 to 4x PCIe 8pin adapter only if your PSU lacks a native 16 pin cable. Connect all four 8 pin plugs to separate PSU cables, not daisy-chained, to meet the 1000 W recommendation.
The liquid metal and server-grade gel are factory-applied and sealed inside the closed WATERFORCE loop. No user servicing is required. Only inspect the three 120 mm ARGB fans for dust buildup every few months and clean them with compressed air if needed.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?