NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
GIGABYTE
Micro-ATX AM5 board with DDR5 up to 8200 MT/s, 256 GB capacity, HDMI 2.1 at 4096×2160 60 Hz, and X3D Turbo Mode for Ryzen 9000 gaming gains
The GIGABYTE B850M D3HP is a Micro ATX board built around the AMD B850 chipset and the AM5 socket. It accepts Ryzen 9000, 8000 and 7000 series processors and supports DDR5 memory up to 8200 MT/s overclocked across four DIMM slots with a 256 GB maximum capacity. An HDMI 2.1 port drives integrated Radeon graphics at up to 4096x2160@60 Hz.
Verify that your chassis fits a Micro ATX form factor and that your power supply provides the required ATX and CPU connectors. Ensure the chosen Ryzen processor is on the vendor’s validated CPU support list for the installed BIOS revision. Confirm that your DDR5 modules match the board’s qualified memory list for the desired data rate, as supported speeds depend on the specific CPU and DIMM population.
This board replaces an older AM4 platform or an entry-level AM5 model when you need DDR5 bandwidth, PCIe 4.0 connectivity and the X3D Turbo Mode BIOS feature that optimises gaming latency on Ryzen X3D chips and mimics that behaviour on non-X3D parts. The jump is worthwhile if your current motherboard limits memory speed, lacks an HDMI 2.1 output or cannot accommodate the processor you plan to install.
Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.
The motherboard itself is included. A compatible AMD Ryzen 7000, 8000 or 9000 series processor, DDR5 memory modules, storage drives, a graphics card if the CPU lacks integrated graphics, a power supply, a chassis and a CPU cooler must all be sourced separately.
The board validates speeds from 4400 MT/s up to 8200 MT/s when overclocked. Pick a kit that matches your CPU's memory controller quality and your budget; an AMD EXPO or XMP certified kit at 6000 MT/s is a common sweet spot for stability and performance.
8200 MT/s is the highest overclocked memory data rate the motherboard can validate. Achieving it depends on the specific Ryzen processor's memory controller, the memory kit's quality, BIOS settings and cooling; most systems will run at a lower stable speed.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?