Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
A green circuit board with two USB-C ports on a metal bracket

GIGABYTE

GIGABYTE GC-Titan Ridge 2.0 Thunderbolt 3 expansion card

SKU CH-5Z7F-YK4CX

Adds dual Thunderbolt 3 ports with 40 Gb/s bandwidth, DisplayPort 1.4 video support and up to 100 W power delivery for daisy-chaining 12 devices

  • Intel Thunderbolt 3 certified for guaranteed compatibility and reliability
  • Dual Thunderbolt 3 ports deliver 40 Gb/s bandwidth each
  • DisplayPort 1.4 support enables 4K video output through the card
  • Daisy-chain up to 12 devices with 6 per Thunderbolt port
  • Power Delivery 3.0 provides up to 100 W charging for connected devices

Certified Thunderbolt 3 Controller

The GIGABYTE GC-Titan Ridge 2.0 is an Intel Thunderbolt 3 certified add-in card built around the Intel DSL7540 controller. It adds two Thunderbolt 3 USB Type-C ports to a desktop system via a PCI Express slot. The card delivers a maximum bandwidth of 40 Gb/s and supports DisplayPort 1.4 for 4K video output. It is suited for creators and professionals who need certified high-speed connectivity for external storage, docks or displays.

Upgrade From Basic USB-C

This card replaces standard USB-C ports that lack Thunderbolt certification or sufficient bandwidth for demanding peripherals. The jump is worth it when workflows require daisy-chaining up to 12 devices across both ports or driving 4K displays through a single cable. It also enables Power Delivery 3.0 support up to 100 W for charging compatible laptops or powering bus-powered devices, a capability absent from typical USB expansion cards.

For Certified Workstation Builds

The card suits builders assembling workstations that demand Intel-certified Thunderbolt 3 compatibility with guaranteed 40 Gb/s throughput and DisplayPort 1.4 video. It is not for systems without an available PCI Express slot or a motherboard header for Thunderbolt header support. Buyers needing more than two ports or a different form factor should look at alternative solutions.

Kohokohdat

  • Intel Thunderbolt 3 certified for guaranteed compatibility and reliability
  • Dual Thunderbolt 3 ports deliver 40 Gb/s bandwidth each
  • DisplayPort 1.4 support enables 4K video output through the card
  • Daisy-chain up to 12 devices with 6 per Thunderbolt port
  • Power Delivery 3.0 provides up to 100 W charging for connected devices

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

What PCIe slot size does the GC-Titan Ridge 2.0 require?

The card installs in a standard PCIe x4 or larger slot on the motherboard.

Which header must be connected during installation for Thunderbolt to function?

A Thunderbolt header cable from the motherboard to the card's onboard connector is required; omitting it is the common mistake.

Will the Intel DSL7540 controller need a firmware update later?

Firmware updates are delivered through the motherboard vendor's BIOS or utility when new versions are released.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.