Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Full-length dual-slot graphics card in matte black with three axial fans and a silver backplate

GIGABYTE

GIGABYTE GeForce RTX 2070 Gaming OC 8GB graphics card

SKU CH-MBS2-FQFXG

GeForce RTX 2070 GPU with 8GB GDDR6, 2304 CUDA cores and boost clocks to 1740 MHz on a dual-slot card

  • InterfacePCI Express 3.0 x16
  • Chipset ManufacturerNVIDIA
  • GPU SeriesNVIDIA GeForce RTX 20 Series
  • GPUGeForce RTX 2070
  • Core ClockOC Mode: 1740 MHz/Gaming Mode: 1725 MHz
  • CUDA Cores2304
  • Real-time ray tracing powered by NVIDIA Turing architecture
  • Triple-fan WINDFORCE cooling with alternate spinning for lower temperatures
  • Factory overclock to 1740 MHz in OC mode for extra performance
  • Four-display support via HDMI 2.0b, three DisplayPort 1.4 and USB Type-C
  • 8 GB GDDR6 on a 256-bit bus delivering 14000 MHz effective memory speed

Built for 1440p and 4K Gaming

The GIGABYTE GV-N2070GAMING OC-8GC uses the NVIDIA GeForce RTX 2070 GPU with 2304 CUDA cores and 8 GB of GDDR6 memory on a 256-bit bus. It targets enthusiasts who want real-time ray tracing and high frame rates at 1440p or entry-level 4K. The card runs at 1725 MHz in Gaming Mode and 1740 MHz in OC Mode for extra headroom.

Fits a Dual-Slot PCI Express 3.0 x16 Slot

The board measures 11.04 inches by 4.58 inches and occupies two expansion slots, so a mid-tower case with adequate length clearance is required. A single PCIe 3.0 x16 lane provides full bandwidth. Display outputs include three DisplayPort 1.4 connectors, one HDMI 2.0b port and a USB Type-C VirtualLink port, driving up to four monitors at 7680 x 4320 resolution.

WINDFORCE 3X Cooler and AORUS Engine Software

The WINDFORCE 3X cooling system uses alternate-spinning fans to reduce turbulence and keep the GPU stable at its factory overclock. AORUS Engine gives a simple interface for switching between Gaming and OC profiles, adjusting fan curves and monitoring temperatures in real time, letting you tune performance without third-party tools.

Kohokohdat

  • Real-time ray tracing powered by NVIDIA Turing architecture
  • Triple-fan WINDFORCE cooling with alternate spinning for lower temperatures
  • Factory overclock to 1740 MHz in OC mode for extra performance
  • Four-display support via HDMI 2.0b, three DisplayPort 1.4 and USB Type-C
  • 8 GB GDDR6 on a 256-bit bus delivering 14000 MHz effective memory speed

Tekniset tiedot

BrandGIGABYTE
ModelGV-N2070GAMING OC-8GC
InterfacePCI Express 3.0 x16
Chipset ManufacturerNVIDIA
GPU SeriesNVIDIA GeForce RTX 20 Series
GPUGeForce RTX 2070
Core ClockOC Mode: 1740 MHz/Gaming Mode: 1725 MHz
CUDA Cores2304
Effective Memory Clock14000 MHz
Memory Size8GB
Memory Interface256-Bit
Memory TypeGDDR6
DirectXDirectX 12
OpenGLOpenGL 4.5
Multi-Monitor Support4
HDMI1 x HDMI 2.0b
DisplayPort3 x DisplayPort 1.4
Other Ports1 x USB Type-C (support VirtualLink)
Max Resolution7680 x 4320 @ 60 Hz
SLI SupportNo
Virtual Reality ReadyYes
Thermal Design Power185W
System RequirementsSystem PSU Limitation: 550W
Power Connector1 x 8-Pin, 1 x 6-Pin
FeaturesPowered by GeForce RTX 2070//Integrated with 8GB GDDR6 256-bit memory interface//WINDFORCE 3X Cooling System with alternate spinning fans//RGB Fusion 2.0 - synchronize with other AORUS devices//Metal Back Plate
Form FactorATX
Max GPU Length280 mm
Card Dimensions (L x H)11.04" x 4.58"
Slot Width2 Slots
Package ContentsAccessories:/Quick guide/Driver CD

Kysymyksiä tästä tuotteesta

How does the WINDFORCE 3X cooler handle heat during long sessions?

The WINDFORCE 3X system uses three fans with alternate spinning to reduce turbulence and move air efficiently across the heatsink.

What power connectors does the card need?

The card requires an 8-pin and a 6-pin PCIe power connector from your PSU.

Which monitor cables are compatible with the outputs?

You can use HDMI 2.0b or DisplayPort 1.4 cables; the USB Type-C port supports VirtualLink headsets.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.