NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
GIGABYTE
Entry-level graphics card with 2GB GDDR5 memory, 75W TDP and HDMI 2.0b for 7680×4320 output
The GIGABYTE GTX 1050 G1 Gaming is a 2GB GDDR5 graphics card built for 1080p gaming and general multimedia use. It uses the GeForce GTX 1050 GPU with a base clock of 1417 MHz and a boost clock of 1531 MHz. The card draws 75W and requires a single 6-pin power connector.
This card replaces integrated graphics or older entry-level GPUs when you need dedicated video memory and hardware CUDA support. The jump is worth it for 1080p gaming at medium settings or for applications that accelerate via CUDA. It supports DirectX 12.0, OpenGL 4.5 and a maximum resolution of 7680 x 4320 pixels.
The ATX form factor occupies two expansion slots and fits standard PCI Express x16 3.0 motherboards. A 6-pin supplementary power connector must be attached; forgetting it is the most common install issue. The card includes three HDMI 2.0b ports, one DisplayPort 1.4 and one DVI-D port for multi-display setups.
| GPU | GeForce GTX 1050 |
|---|---|
| Memory Size | 2GB |
| Memory Type | GDDR5 |
| Thermal Design Power | 75W |
The card occupies two expansion slots and draws 75 W through a single 6-pin PCIe connector; verify your case has two adjacent rear brackets free and that your power supply includes a 6-pin lead.
Insert the card fully into the top PCIe x16 3.0 slot until the retention clip clicks, secure the bracket screw, then connect the 6-pin power cable; the step often missed is plugging in the power cable before closing the case.
Power down, unplug the 6-pin connector, remove the card, then use short bursts of compressed air to blow dust from the heatsink fins and fan blades; avoid spinning the fan with the air stream.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?