Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Triple-fan graphics card with metal backplate and RGB lighting

GIGABYTE

GIGABYTE GV-N306TAORUS E-8GD GeForce RTX 3060 Ti graphics card

SKU CH-K5NT-66KT5 MPN GV-N306TAORUS E-8GD

Refurbished GeForce RTX 3060 Ti with 8GB GDDR6, 256-bit memory, WINDFORCE 3X cooling and a metal backplate

  • InterfacePCI Express 4.0
  • Chipset ManufacturerNVIDIA
  • GPU SeriesNVIDIA GeForce RTX 30 Series
  • GPUGeForce RTX 3060 Ti
  • Core Clock1785 MHz
  • CUDA Cores4864
  • PCIe 4.0 interface enables faster data throughput
  • 4864 CUDA cores accelerate parallel workloads
  • 8GB GDDR6 on 256-bit bus delivers high memory bandwidth
  • WINDFORCE 3X cooler with alternate spinning fans improves thermal performance
  • Dual HDMI 2.1 and dual DisplayPort 1.4a drive four 8K displays

AORUS RTX 3060 Ti ELITE 8G

The GIGABYTE GV-N306TAORUS E-8GD is a refurbished graphics card built on the NVIDIA Ampere architecture with 4864 CUDA cores and 8GB GDDR6 memory on a 256-bit bus. It targets gamers and creators who need solid 1440p performance and ray-tracing capability without stepping up to a higher tier.

Sustained load with WINDFORCE 3X cooling

The WINDFORCE 3X system uses three alternate-spinning fans and a metal back plate to move heat away from the GPU during long sessions. A 1785 MHz boost clock and 14000 MHz effective memory clock stay stable when the 650 W power supply feeds both the 6-pin and 8-pin connectors.

Install in a 3-slot ATX space

The card measures 296 mm long and occupies three expansion slots, so verify case clearance before fitting it into a PCIe 4.0 slot. Connect one 6-pin and one 8-pin power cable, then attach up to four displays via two HDMI 2.1 and two DisplayPort 1.4a outputs for 7680 x 4320 resolution.

Kohokohdat

  • PCIe 4.0 interface enables faster data throughput
  • 4864 CUDA cores accelerate parallel workloads
  • 8GB GDDR6 on 256-bit bus delivers high memory bandwidth
  • WINDFORCE 3X cooler with alternate spinning fans improves thermal performance
  • Dual HDMI 2.1 and dual DisplayPort 1.4a drive four 8K displays

Tekniset tiedot

BrandGIGABYTE
SeriesAORUS
ModelGV-N306TAORUS E-8GD
InterfacePCI Express 4.0
Chipset ManufacturerNVIDIA
GPU SeriesNVIDIA GeForce RTX 30 Series
GPUGeForce RTX 3060 Ti
Core Clock1785 MHz
CUDA Cores4864
Effective Memory Clock14000 MHz
Memory Size8GB
Memory Interface256-Bit
Memory TypeGDDR6
DirectXDirectX 12 Ultimate
OpenGLOpenGL 4.6
Multi-Monitor Support4
HDMI2 x HDMI 2.1
DisplayPort2 x DisplayPort 1.4a
Max Resolution7680 x 4320
SLI SupportNo
Virtual Reality ReadyYes
CoolerWINDFORCE 3X
Recommended PSU Wattage650W
Power Connector1 x 6-Pin + 1 x 8-Pin
FeaturesNVIDIA Ampere Streaming Multiprocessors
2nd Generation RT Cores
3rd Generation Tensor Cores
Powered by GeForce RTX 3060 Ti
Integrated with 8GB GDDR6 256-bit memory interface
WINDFORCE 3X Cooling System with alternate spinning fans
RGB Fusion 2.0
Protection metal back plate
Form FactorATX
Max GPU Length296 mm
Card Dimensions (L x H)11.65" x 4.61"
Slot Width3 Slots
Lähetyspaino1.61 kg
Pakkauksen mitat406 × 236 × 86 mm

Kysymyksiä tästä tuotteesta

How loud and hot does the WINDFORCE 3X cooler run when the RTX 3060 Ti sustains its 1785 MHz core clock all day?

The triple-fan WINDFORCE 3X design uses alternate spinning fans and a metal back-plate to move heat away from the GPU, keeping temperatures and noise lower than a standard dual-fan cooler under continuous load.

Which power connectors and PSU wattage must my system already provide for this GV-N306TAORUS E-8GD?

You need a 650 W power supply with both an 8-pin and a 6-pin PCIe power cable to meet the card's dual-connector requirement.

Will the 296 mm length and 3-slot thickness fit alongside my existing motherboard and drives without blocking slots or cables?

The card occupies three expansion slots and measures 296 mm long, so verify your case has that clearance and that no front-panel headers or drive cages sit in the way.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.