NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
GIGABYTE
A GeForce RTX 3070 GPU with 5888 CUDA cores, 8GB GDDR6 on a 256-bit bus, 1815 MHz core clock, WINDFORCE 3X cooling and 220W power draw
This GIGABYTE GeForce RTX 3070 Gaming OC graphics card targets gamers and creators who need strong 1440p performance. It ships with 8GB of GDDR6 memory across a 256-bit interface and connects via PCI Express 4.0. The GPU runs at a 1815 MHz core clock and packs 5888 CUDA cores for heavy compute tasks.
Under continuous load the card draws up to 220W through one 6-pin and one 8-pin power connector, so a 650W supply is recommended. The WINDFORCE 3X cooler uses alternate spinning fans to keep airflow steady during long sessions. Drivers expose the 2nd generation RT cores and 3rd generation Tensor cores for supported workloads.
The triple-fan design and metal backplate help dissipate heat while adding structural rigidity. Fan curves stay moderate in typical gaming scenarios, keeping acoustics low inside an ATX case. The 286 mm length fits most standard chassis without clearance issues. Power draw remains close to the rated 220W during normal operation.
| Brand | GIGABYTE |
|---|---|
| Series | Gaming |
| Model | GV-N3070GAMING OC-8GD (rev. 2.0) |
| Interface | PCI Express 4.0 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 30 Series |
| GPU | GeForce RTX 3070 |
| Core Clock | 1815 MHz |
| CUDA Cores | 5888 |
| Effective Memory Clock | 14000 MHz |
| Memory Size | 8GB |
| Memory Interface | 256-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 2 x HDMI 2.1 |
| DisplayPort | 2 x DisplayPort 1.4a |
| Max Resolution | 7680 x 4320 |
| SLI Support | No |
| Virtual Reality Ready | Yes |
| Cooler | WINDFORCE 3X |
| Thermal Design Power | 220W |
| Recommended PSU Wattage | 650W |
| Power Connector | 1 x 6-Pin + 1 x 8-Pin |
| Features | NVIDIA Ampere Streaming Multiprocessors 2nd Generation RT Cores 3rd Generation Tensor Cores Powered by GeForce RTX 3070 Integrated with 8GB GDDR6 256-bit memory interface WINDFORCE 3X Cooling System with alternate spinning fans RGB Fusion 2.0 Protection metal back plate LHR (Lite Hash Rate) version |
| Form Factor | ATX |
| Max GPU Length | 286 mm |
| Card Dimensions (L x H) | 11.26" x 4.53" |
| Slot Width | 2.5 Slot |
| Lähetyspaino | 1.54 kg |
| Pakkauksen mitat | 406 × 238 × 90 mm |
The WINDFORCE 3X system uses three alternate-spinning fans and a metal back-plate to move heat away from the GPU while it operates at the rated 220W thermal design power.
The board requires one 6-pin and one 8-pin PCIe power connector from the power supply.
Yes, the card is backward compatible and will run at PCIe 3.0 speeds when installed in a PCIe 3.0 slot.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?