NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
GIGABYTE
Mini ITX Intel Z690 board with DDR5 up to 6200 MT/s, dual M.2 slots, 2.5 GbE LAN, Wi-Fi 6 and Bluetooth 5.2
The GIGABYTE Z690I AORUS ULTRA LITE is a Mini ITX motherboard built for Intel 12th Gen Core processors. It fits small-form-factor builds that need full overclocking control and dual-channel DDR5 memory up to 64 GB. The 10+2+1 phase digital VRM with 105 A power stages delivers stable current for high-frequency operation. Integrated Wi-Fi 6 AX201 and 2.5 GbE LAN provide modern wireless and wired connectivity.
The single full-length slot runs at PCI Express 3.0 x16, so graphics cards cannot use PCIe 4.0 or 5.0 bandwidth. Two M.2 sockets support PCIe 4.0 x4 NVMe drives; one is routed from the CPU, the other from the chipset. SATA is limited to two 6 Gb/s ports. Rear USB includes one USB 3.2 Gen 2x2 Type-C, three USB 3.2 Gen 2 Type-A, two USB 3.2 Gen 1 and two USB 2.0 ports.
Verify that your CPU cooler includes an LGA 1700 mounting kit, as older brackets will not fit. Only non-ECC unbuffered DDR5 DIMMs are supported, with validated speeds from 4800 up to 6200 MT/s when overclocked. The board requires an ATX 24-pin and an 8-pin EPS connector. Q-Flash Plus allows BIOS updates without a processor installed.
| Brand | GIGABYTE |
|---|---|
| Model | Z690I AORUS ULTRA LITE (rev. 1.0) |
| CPU Socket Type | LGA 1700 |
| Chipset | Intel Z690 |
| Onboard Video Chipset | Supported only by CPU with integrated graphic |
| Number of Memory Slots | 2x288pin (DDR5) |
| Memory Standard | DDR5 6200(OC) / 6000(OC) / 5800(OC) / 5600(OC) / 5400(OC) / 5200(OC) / 4800 / 4000 |
| Maximum Memory Supported | 64GB |
| Channel Supported | Dual Channel |
| PCI Express 3.0 x16 | 1 x PCI Express 3.0 x16 |
| Serial ATA (SATA) | 2 x SATA 6Gb/s |
| M.2 | CPU: 1 x M.2 connector on the back of the GC-Z690I BTB PLUG (Socket 3, M key, type 2260/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU) Chipset: 1 x M.2 connector on the front of GC-Z690I BTB PLUG (Socket 3, M key, type 2242/2260/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB) |
| Intel Optane Ready | Intel Optane Memory Ready * System acceleration with Intel Optane Memory can only be enabled on the M.2 connectors supported by the Chipset. |
| Audio Chipset | Realtek ALC4080 |
| Audio Channels | 2 Channels |
| Max LAN Speed | 2.5Gbps |
| Wireless LAN | Intel Wi-Fi 6 AX201 WIFI a/b/g/n/ac/ax |
| Bluetooth | Bluetooth 5.2 |
| Back I/O Ports | 2 x SMA antenna connectors (2T2R) 1 x DisplayPort 1 x HDMI port 1 x USB Type-C port, with USB 3.2 Gen 2x2 support 3 x USB 3.2 Gen 2 Type-A ports (red) 2 x USB 3.2 Gen 1 ports 2 x USB 2.0/1.1 ports 1 x Q-Flash Plus button 1 x RJ-45 port 2 x audio jacks |
| Onboard USB | 1 x USB Type-C header, with USB 3.2 Gen 2 support 1 x USB 3.2 Gen 1 header 1 x USB 2.0/1.1 header(Note 1) (Note 1) The connector is on the front of GC-Z690I BTB PLUG. |
| Other Connectors | 1 x external power connector(Note 1) 1 x CPU fan header 1 x water cooling CPU fan header 2 x system fan headers(SYS_FAN1/SYS_FAN2(Note 1)) 1 x addressable LED strip header(Note 1) 1 x RGB LED strip header 1 x front panel header 1 x front panel audio header(routed from the adapter card on the rear panel) 1 x speaker header 1 x reset button(Note 1) 1 x reset jumper 1 x Clear CMOS jumper (Note 1) The connector is on the front of GC-Z690I BTB PLUG. * All fan headers are subject to support AIO_Pump, Pump and high performance fan with the capability of delivering up to 2A/12V @ 24W. |
| Windows 11 | Ready |
| Form Factor | Mini ITX |
| LED Lighting | RGB |
| Dimensions (W x L) | 6.7" x 6.7" |
| Power Pin | 1 x 24-pin ATX main power connector 1 x 8-pin ATX 12V power connector |
The board uses the LGA 1700 socket and is only compatible with coolers designed for Intel LGA 1700 mounting brackets. Check your cooler specifications before buying.
One M.2 slot connects to the CPU and runs at PCIe 4.0 x4. The second slot connects to the chipset and also supports PCIe 4.0 x4, so both can operate at full speed.
The board natively supports DDR5 4800. Speeds from 5200 up to 6200 are listed as overclocked profiles and require memory modules rated for those frequencies.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?