Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 4U rackmount server chassis with front drive bays and lock

Gintol

Gintol 4U Server Chassis Rackmount PC Case ATX Black

SKU CH-SM2R-V8ZBQ

A 4U rackmount chassis holding ATX, micro-ATX or mini-ITX boards with seven 3.5-inch and two 2.5-inch drive bays, three 5.25-inch optical slots.

  • Motherboard CompatibilityATX
  • Power Supply MountedRear
  • ColorBlack
  • Case MaterialABS / Iron / SGCC
  • TypeATX (12 *9.6 inches)and below MATX/ITX motherboards
  • Power SupplySupport ATX chassis power supply
  • Fits ATX, MATX and ITX boards up to 12×9.6 inches
  • Seven 3.5-inch and two 2.5-inch drive bays for storage density
  • Three 5.25-inch optical drive slots for legacy media
  • Seven full-height expansion cards supported for add-in flexibility
  • Front panel includes two USB 2.0 ports, power and reset switches, plus power and HDD LEDs

Server Chassis for ATX Builds

The Gintol 4U rackmount case fits ATX, micro-ATX and mini-ITX motherboards up to 12 by 9.6 inches. It is built from ABS, iron and SGCC steel in a black finish and includes a lock for physical security. A single 12025 fan handles chassis cooling while two 6 cm fan positions are reserved at the rear. The unit measures 482 mm wide, 450 mm deep and 178 mm high with a net weight of 10.5 kg.

Suited for Multi-Drive Servers

This chassis suits builders who need seven 3.5-inch and two 2.5-inch drive bays plus three 5.25-inch optical slots in a 4U footprint. It also provides seven full-height expansion slots for add-in cards. Buyers who require hot-swap drive cages, redundant power supplies or front-accessible drive trays should look at a different enclosure. The front panel offers only two USB 2.0 ports, power and reset switches, and power and drive activity LEDs.

Seven 3.5-Inch Drive Bays

The defining specification is support for seven 3.5-inch hard drives alongside two 2.5-inch slots. This density determines whether the case can hold the storage array a server build requires. The rear-mounted ATX power supply layout and 4U height are fixed by the chassis design.

Kohokohdat

  • Fits ATX, MATX and ITX boards up to 12×9.6 inches
  • Seven 3.5-inch and two 2.5-inch drive bays for storage density
  • Three 5.25-inch optical drive slots for legacy media
  • Seven full-height expansion cards supported for add-in flexibility
  • Front panel includes two USB 2.0 ports, power and reset switches, plus power and HDD LEDs

Tekniset tiedot

Motherboard CompatibilityATX
Power Supply MountedRear
ColorBlack
Case MaterialABS / Iron / SGCC
TypeATX (12 *9.6 inches)and below MATX/ITX motherboards
Power SupplySupport ATX chassis power supply

Kysymyksiä tästä tuotteesta

How much heat and noise does the 12025 fan and two 6CM rear fans produce when the chassis runs all day?

The chassis includes one 12025 fan for cooling and reserves space for two 6CM rear fans; actual noise and heat output depend on the fans you install and the system load.

Which components must I already own for this case to work?

You need an ATX, MATX or ITX motherboard up to 12 by 9.6 inches, an ATX power supply, and your own storage drives and expansion cards.

Will my existing 3.5-inch drives and 5.25-inch optical drives fit alongside a full-height add-in card?

Yes, the case holds seven 3.5-inch drives, two 2.5-inch drives, three 5.25-inch optical drives and seven full-height expansion slots simultaneously.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.