Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black rectangular mini-tower case with tempered glass side panel, 15.3L volume, 35x16x29.5cm

Gintol

Gintol A600 PC case Black 15.3L mATX/ITX 325mm GPU 13.5cm CPU 2.8kg

SKU CH-Y402-A3M7A

Compact 15.3L chassis fits Micro-ATX or Mini-ITX boards, takes graphics cards up to 325 mm and CPU coolers up to 13.5 cm, and includes a tempered-glass side panel

  • ColorBlack
  • Motherboard CompatibilityMICRO ATX /ITX
  • Front PortsUSB3.0*1/Computerswitch button*1
  • Fan Options12cm fan*2/9cm fan*1
  • Max GPU Length325 mm
  • Max CPU Cooler HeightThe cPU heat sink does not exceed 13.5cm

Gintol A600 Gintol A600 Black

  • 3 L compact chassis fits small spaces
  • tempered glass side panel shows the build
  • supports micro-ATX and mini-ITX motherboards
  • fits graphics cards up to 325 mm long
  • accepts ATX power supplies up to 14 cm deep

15.3L portable mATX/ITX chassis

The Gintol A600 is a 15.3 litre black case that accepts Micro-ATX or Mini-ITX motherboards. A tempered-glass side panel shows the interior while the shell weighs 2.8 kg and measures 35 cm long, 16 cm wide and 29.5 cm high. One front USB 3.0 port and the power button provide basic I/O.

Upgrade from larger ATX towers

Builders moving from full-size ATX enclosures gain a footprint of roughly 35 by 16 cm while keeping ATX power-supply support up to 14 cm long. The jump is worth it when desk space is tight but a graphics card up to 325 mm and a CPU cooler up to 13.5 cm are still required. SFX units fit with an adapter board.

Build integration: fans, drives, power

Two 12 cm fan mounts and one 9 cm mount handle airflow; fans are not included. Storage options cover one 3.5 inch drive and two SSDs. An ATX power supply up to 14 cm long slides in directly, while an SFX unit needs the extra adapter board. Rubber feet and top and bottom dust filters complete the package.

Kohokohdat

  • 3 L compact chassis fits small spaces
  • tempered glass side panel shows the build
  • supports micro-ATX and mini-ITX motherboards
  • fits graphics cards up to 325 mm long
  • accepts ATX power supplies up to 14 cm deep

Tekniset tiedot

BrandGintol
ModelA600
ColorBlack
Motherboard CompatibilityMICRO ATX /ITX
Front PortsUSB3.0*1/Computerswitch button*1
Fan Options12cm fan*2/9cm fan*1
Max GPU Length325 mm
Max CPU Cooler HeightThe cPU heat sink does not exceed 13.5cm
Max PSU LengthATX
Dimensions35cm(long)*16cm(wide)*29.5cm(high)
Weight2.8KG

Tämän mallin muut versiot

1 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What clearance does the 35 cm deep chassis leave for a 325 mm graphics card and ATX power supply?

The case fits GPUs up to 325 mm and ATX power supplies up to 14 cm long, leaving a few centimetres of cable routing space behind the PSU.

Which screws and standoffs secure the Micro ATX board in the 1.0 mm steel frame?

Use the included motherboard standoffs for the 22.4×24.4 cm Micro ATX pattern; the ITX holes at 17×17 cm are also threaded.

How often should the top and bottom magnetic dust filters be cleaned?

Vacuum or rinse the filters every few months; they lift off without tools so airflow to the two 12 cm and one 9 cm fan mounts stays unrestricted.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.