Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Compact white ITX case, 206 by 88 by 225 mm, 3.8 litre volume, no graphics card support

Gintol

Gintol G100 ITX 3.8L FLEX White PC case

SKU CH-1F4E-61CMZ

A 3.8L Mini-ITX chassis supporting FLEX power supplies and a single 2.5" drive, limited to integrated graphics with a 67mm cooler clearance

  • Motherboard CompatibilityMini ITX
  • Power Supply MountedBottom
  • ColorWhite
  • Case MaterialSPCC
  • 120mm FansNo
  • 40mm Fans0
  • Ultra-compact 3.8 L chassis fits tight spaces
  • Bottom-mounted FLEX PSU keeps cable routing clean
  • Mini-ITX 170 mm board support for full desktop CPU
  • 67 mm cooler clearance handles low-profile towers
  • Single 2.5" drive bay stores OS and data

Mini ITX chassis for integrated graphics

The Gintol G100 is a 3.8L white case built for Mini ITX boards up to 170 by 170mm. It accepts a single 2.5 inch drive and a FLEX power supply mounted at the bottom. No graphics card can be installed, so the system relies entirely on the processor's integrated graphics. The shell ships without fans or extra accessories.

FLEX power supply and 67mm cooler limit

Power comes from a FLEX form-factor unit only; standard ATX or SFX units will not fit. CPU cooler height is capped at 67mm, restricting choices to low-profile air coolers. The case includes no 40, 60, 70, 80, 90, 120 or 140mm fan mounts, so airflow depends on the cooler and passive ventilation alone.

Check board size, cooler height and graphics need

Verify your motherboard is exactly 170 by 170mm Mini ITX and that your chosen cooler is 67mm tall or shorter. Confirm you do not require a discrete graphics card, as the chassis has no slot or space for one. Ensure the power supply you plan to use is a FLEX model, not ATX or SFX.

Kohokohdat

  • Ultra-compact 3.8 L chassis fits tight spaces
  • Bottom-mounted FLEX PSU keeps cable routing clean
  • Mini-ITX 170 mm board support for full desktop CPU
  • 67 mm cooler clearance handles low-profile towers
  • Single 2.5" drive bay stores OS and data

Tekniset tiedot

Motherboard CompatibilityMini ITX
Power Supply MountedBottom
ColorWhite
Case MaterialSPCC
120mm FansNo
40mm Fans0
60mm Fans0
70mm Fans0
80mm Fans0
90mm Fans0
140mm FansNo
BrandGintol

Kysymyksiä tästä tuotteesta

Should I pick the 3.8 L Gintol G100 or a larger Mini-ITX case?

Choose the G100 if you need the smallest possible footprint — 206 × 88 × 225 mm — and only plan to use integrated graphics with a 67 mm cooler and one 2.5″ drive.

What does the 3.8 L volume mean once the case is on my desk?

It occupies roughly the space of a shoebox, fitting a 170 × 170 mm Mini-ITX board, a FLEX power supply, a low-profile CPU cooler up to 67 mm tall, and a single 2.5″ drive — no room for a discrete GPU.

What does FLEX power supply support cap in practice?

It limits you to 1U FLEX form-factor PSUs, which are shorter than standard ATX units and typically top out at lower wattages, so plan your CPU and drive power draw accordingly.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.