Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver rectangular ASIC miner with front grille and rear ports

Godminer

Godminer S19pro 110 TH/s 3250W mining hardware

SKU CH-B4R2-XC52W

SHA-256 ASIC miner delivering 110 TH/s at 3250 W with 29.5 J/TH efficiency, RJ45 Ethernet and 220 V input

  • ColorSilver
  • Delivers 110 TH/s hashrate for high Bitcoin mining throughput
  • Consumes 3250 W for 29.5 J/TH power efficiency
  • Connects via RJ45 Ethernet 10/100M for stable network operation
  • Fits 570×316×430 mm footprint weighing 15.2 kg for rack planning
  • Requires 220 V input voltage to prevent hardware damage

Godminer S19pro SHA-256 ASIC Miner

This Godminer S19pro is a dedicated SHA-256 ASIC miner built for Bitcoin mining. It delivers a hashrate of 110 TH/s while drawing 3250 W of power. The unit is intended for operators who can provide 220 V input and adequate cooling for continuous operation.

RJ45 Ethernet 10/100M Network Limit

The miner connects through a single RJ45 Ethernet port limited to 10/100 Mbit/s speeds. This bandwidth ceiling is sufficient for stratum traffic but will not support higher-throughput management tools. A stable wired connection is required because no wireless option exists.

29.5 J/TH Power Efficiency Decides Fit

At 29.5 J/TH the S19pro sets the break-even threshold for electricity cost versus block rewards. If your power rate cannot sustain 3250 W continuously at this efficiency, the hardware will not return a profit. No other specification overrides this figure.

Kohokohdat

  • Delivers 110 TH/s hashrate for high Bitcoin mining throughput
  • Consumes 3250 W for 29.5 J/TH power efficiency
  • Connects via RJ45 Ethernet 10/100M for stable network operation
  • Fits 570×316×430 mm footprint weighing 15.2 kg for rack planning
  • Requires 220 V input voltage to prevent hardware damage

Tekniset tiedot

BrandGodminer
ModelS19pro
ColorSilver

Kysymyksiä tästä tuotteesta

Should I choose the 110 TH/s model over the 95 TH/s version?

The 110 TH/s model delivers higher hashrate at 29.5 J/TH efficiency, drawing 3250 W. The 95 TH/s unit uses less power but produces fewer hashes per second, so pick based on your electricity cost and cooling capacity.

What does 110 TH/s mean for daily Bitcoin earnings?

At current difficulty the supplier estimates roughly 45 USD per day before electricity. Actual income varies with network difficulty, pool fees and your power rate, so treat the figure as a rough guide only.

Will the RJ45 10/100M port limit my mining pool connection?

The 100 Mbit Ethernet link is more than enough for stratum traffic, which uses only a few kilobits per second. It will not bottleneck your hashrate or pool communication.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.