Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular gold ASIC miner with front grille, Ethernet port, 264 by 200 by 290 mm

Goldshell

Goldshell CK5 12TH/s 2400W ASIC mining hardware

SKU CH-T6KV-E1TY1

ASIC miner delivering 12 TH/s at 2400 W with Ethernet connectivity, 80 dB noise and 8.5 kg weight

  • Delivers 12 TH/s hashrate for Kadena mining
  • Draws 2400 W wall power with ±5 % tolerance
  • Operates at 80 dB noise level for rack awareness
  • Accepts 176–264 V input for flexible power sourcing
  • Compact 264×200×290 mm frame weighs 8.5 kg

CK5 ASIC Miner for CKB

The Goldshell CK5 is an application-specific integrated circuit built for mining the Nervos CKB blockchain. It delivers a nominal hashrate of 12 TH/s with a tolerance of ±5 percent and draws approximately 2400 W from the wall at the same variance. The unit weighs 8.5 kg and measures 264 mm by 200 mm by 290 mm. It is intended for operators who run dedicated mining infrastructure.

Ethernet link and 176–264 V input

The only data connection is a wired Ethernet port, so the miner must be cabled to a router or switch with a stable internet link. Power is accepted across a 176 V to 264 V range, allowing use on common single-phase supplies in many regions without an external transformer. No wireless, USB or additional control interfaces are provided.

80 dB noise and 0–35 °C operating window

At roughly 80 dB the fan noise is comparable to a loud vacuum cleaner, making the device unsuitable for living spaces or shared offices. The specified operating temperature range tops out at 35 °C, so inlet air must stay below that level; sustained higher ambient temperatures will cause thermal throttling or shutdown. Adequate airflow and cooling capacity are therefore mandatory.

Kohokohdat

  • Delivers 12 TH/s hashrate for Kadena mining
  • Draws 2400 W wall power with ±5 % tolerance
  • Operates at 80 dB noise level for rack awareness
  • Accepts 176–264 V input for flexible power sourcing
  • Compact 264×200×290 mm frame weighs 8.5 kg

Tekniset tiedot

BrandGoldshell

Kysymyksiä tästä tuotteesta

What fan maintenance does the Goldshell CK5 require over time?

The unit runs at 80 dB with high airflow, so dust will build up on the intake and exhaust grilles; schedule regular cleaning to keep temperatures in check.

Which limit appears first when the CK5 runs continuously at 2400 W?

The 35 °C maximum operating temperature is the first ceiling; if inlet air approaches that level the miner will throttle or shut down before any other component hits a hard limit.

How much heat and noise does the CK5 produce during all-day operation?

It draws 2400 W and emits 80 dB, meaning it puts out roughly 2.4 kW of heat and sounds like a loud vacuum cleaner in the same room.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.