Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Compact rectangular ASIC miner in light casing, 178 by 150 by 84 millimetres, 2.2 kilograms, dual-mode ports, built-in PSU

Goldshell

Goldshell Mini Doge III 700 MH/s 400 W mining hardware

SKU CH-S0P2-DZGWZ

Scrypt ASIC miner delivering 700 MH/s at 400 W with 0.57 J/MH efficiency, remote app control, Wi-Fi, and 35 dB noise in a 2.2 kg box

  • TypeMining Machine/Miner
  • Compatible CurrencyDogecoin, Litecoin
  • Mining HardwareASIC
  • Delivers 700 MH/s Scrypt performance for LTC, DOGE and BELLS mining
  • Runs at 400 W with 0.57 J/MH efficiency for lower electricity cost
  • Operates at 35 dB for quiet home or office placement
  • Compact 178×150×84 mm chassis weighs only 2.2 kg for easy setup
  • Accepts 100–240 VAC input with included PSU for worldwide compatibility

Goldshell Mini Doge III Scrypt Miner

This ASIC miner targets the Scrypt algorithm used by Dogecoin, Litecoin and Bells. It delivers a default hashrate of 700MH/s±5% while drawing 400W±5% from a 100 240VAC supply. The unit measures 178*150*84mm and weighs 2.2 kg, making it suitable for home or small-farm deployment. Noise is rated at 35dB under typical operation.

Upgrade From GPU or Older Scrypt ASIC

Moving from a graphics-card rig or an earlier Scrypt box becomes worthwhile when electricity cost per kilowatt-hour makes the 0.57J/MH efficiency a clear advantage. The integrated power supply and 10A cable simplify the swap, while dual-mode connectivity and a remote app replace manual configuration. Wi-Fi support adds placement flexibility without extra cabling.

Home Miners Wanting Quiet Scrypt Hardware

Buyers who need a compact, low-noise Scrypt miner with built-in PSU and app-based monitoring will fit this profile. Operators requiring higher hashrate density, different algorithms, or industrial three-phase power should evaluate larger rackmount units instead. The 0~35 operating temperature range and 65% humidity limit also assume a controlled indoor environment.

Kohokohdat

  • Delivers 700 MH/s Scrypt performance for LTC, DOGE and BELLS mining
  • Runs at 400 W with 0.57 J/MH efficiency for lower electricity cost
  • Operates at 35 dB for quiet home or office placement
  • Compact 178×150×84 mm chassis weighs only 2.2 kg for easy setup
  • Accepts 100–240 VAC input with included PSU for worldwide compatibility

Tekniset tiedot

Brandgoldshell
TypeMining Machine/Miner
Compatible CurrencyDogecoin, Litecoin
Mining HardwareASIC

Kysymyksiä tästä tuotteesta

What are the exact dimensions of the Goldshell Mini Doge III so I can check if it fits my shelf?

The miner measures 178 mm wide, 150 mm deep and 84 mm high, weighing 2.2 kg.

How do I get the miner running and what step do people often miss?

Connect the included 10 A power cable to a 100–240 VAC outlet, link the dual-mode network port to your router, then use the remote app to enter pool credentials — many forget the app setup.

When will I need to replace the cooling fan and what spec should I match?

The 4500 rpm fan runs continuously; plan to swap it when noise rises above the rated 35 dB or airflow drops, matching the same speed rating.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.