Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two white 90-degree rotary fittings with knurled nickel-plated brass bodies and G1/4 threads

greenDracaena

greenDracaena D-90-Rotary 90° G1/4" Rotary Fitting 2-pack White

SKU CH-RQM6-KHJ0Y

Two nickel-plated brass 90° rotary adapters with G1/4″ BSP threads for custom water-cooling loops

  • Radiator Size2 pcs
  • Fan Size2 pcs
  • Fan Dim.1.29 in x 1.29 in x 0.59 in
  • LED ColorWhite (90 Rotary)
  • Nickel-plated brass construction resists corrosion for long loop life
  • 90° rotary joint lets you align tubing without stress on fittings
  • G1/4" BSP threads with 5 mm male and 6 mm female lengths ensure broad compatibility
  • Compact 28.9 mm installed height fits tight spaces between components
  • Two white fittings included for symmetrical dual-loop or parallel runs

greenDracaena D-90-Rotary 90° Fitting Pair

This two-pack supplies nickel-plated brass 90° rotary adapters with G1/4" BSP threads for custom water-cooling loops. The male end offers a 5 mm thread length while the female end provides 6 mm, letting builders route tubing around tight corners without stress on rigid or flexible runs. Each fitting measures 1.29 in by 1.29 in by .59 in with a 17.9 mm knurled diameter and 28.9 mm installed height.

Upgrade from fixed 90° elbows

Fixed elbows lock orientation at install time, forcing tube bends to match the fitting. These rotary joints spin freely after tightening, so the outlet can be aligned precisely once the loop is pressure-tested. The jump is worth it when tubing paths cross motherboard heatsinks, GPU backplates or reservoir ports that leave no room for trial-and-error positioning. Builders using only straight fittings or non-rotary elbows gain the ability to finalise angles after the loop is filled.

Verify G1/4" thread compatibility and clearance

Confirm every component in the loop uses G1/4" BSP threads; mismatched thread standards will leak. Measure the space around each connection point — 28.9 mm installed height plus tube bend radius must fit between components and case panels. The 17.9 mm knurled diameter needs enough room for a wrench or fingers during assembly. Nickel-plated brass resists corrosion but should not contact bare aluminium blocks without a corrosion inhibitor in the coolant.

Kohokohdat

  • Nickel-plated brass construction resists corrosion for long loop life
  • 90° rotary joint lets you align tubing without stress on fittings
  • G1/4" BSP threads with 5 mm male and 6 mm female lengths ensure broad compatibility
  • Compact 28.9 mm installed height fits tight spaces between components
  • Two white fittings included for symmetrical dual-loop or parallel runs

Tekniset tiedot

BrandgreenDracaena
SeriesWhite (90 Rotary)
ModelD-90-Rotary
Part NumberD-90-Rotary-White-2-S
Radiator Size2 pcs
Fan Size2 pcs
Fan Dim.1.29 in x 1.29 in x 0.59 in
LED ColorWhite (90 Rotary)

Kysymyksiä tästä tuotteesta

What clearance does the 17.9 mm knurled body and 28.9 mm installed height need?

The knurled section measures 17.9 mm across and the fitting stands 28.9 mm tall once threaded in, so allow that diameter and height around the port.

Which way do the 5 mm male and 6 mm female G1/4" threads go, and what step is often missed?

The 5 mm male end threads into your component and the 6 mm female end accepts a standard G1/4" fitting; the step often missed is using a wrench on the knurled nut only so the rotary joint stays free to swivel.

When should the nickel-plated brass fitting or its O-ring be replaced?

Inspect the O-ring each time the loop is drained; replace the fitting if the plating shows corrosion or the rotary action feels gritty, otherwise the brass body is rated for the life of the loop.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.