Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Gulfe

Gulfe ATX Power Supply for HP Pavilion Elite E9105Z E9120Y

SKU CH-6GJD-34XVA

ATX replacement supply for HP Pavilion Elite E9105Z and E9120Y desktops with reduced depth, 115/230 V input and over-current protection

  • TypeATX
  • Fans1
  • Weight2.5
  • Direct replacement for HP Pavilion Elite E9105Z and E9120Y desktops
  • Reduced-depth ATX form factor fits tight chassis spaces at 5.9" height
  • Single 120 mm fan provides active cooling
  • Over-current and over-power protection safeguards components
  • Connectors include 24-pin ATX, 4-pin CPU, three SATA, two LP4 and one floppy

Direct Replacement for HP Pavilion Elite

This ATX power supply is built to replace the original unit in HP Pavilion Elite E9105Z and E9120Y desktop PCs. It matches the required form factor and connector layout for a straightforward swap. The reduced depth design helps it fit the existing chassis without modification.

Steady Output Under Continuous Load

The unit delivers stable rails at +5V, -5V, +12V1, +12V2, +3.3V, -12V and +5V-SB during extended operation. Rise time stays under 70 ms and hold-up time reaches a minimum of 17 ms at nominal input. Low ripple and noise levels are maintained through Hi-Pot tested construction.

Single Fan Cooling with Protection Circuits

A single fan manages thermals across the 2.5 kg chassis while over current and over power protection guard connected components. High efficiency operation keeps power draw in check across 110/220 V or 115/230 V inputs at 47 to 63 Hz. The compact 5.86 by 3.3 inch footprint aids airflow in the original case.

Kohokohdat

  • Direct replacement for HP Pavilion Elite E9105Z and E9120Y desktops
  • Reduced-depth ATX form factor fits tight chassis spaces at 5.9" height
  • Single 120 mm fan provides active cooling
  • Over-current and over-power protection safeguards components
  • Connectors include 24-pin ATX, 4-pin CPU, three SATA, two LP4 and one floppy

Tekniset tiedot

BrandGulfe
TypeATX
Fans1
Weight2.5

Kysymyksiä tästä tuotteesta

How much noise and heat does the 2.5 kg unit produce when running all day?

It uses a single fan for cooling; the supplier notes low ripple and noise but does not publish a decibel or thermal rating.

Which cables or connectors must I already have to install this ATX supply in an HP Pavilion Elite E9105Z or E9120Y?

The unit includes a 24-pin ATX connector, one 4-pin P4-12V, three SATA 15-pin, two LP4 4-pin and one floppy 4-pin; no extra cables are required.

Will the reduced-depth 5.9-inch height and 3.4-inch width fit alongside the original motherboard and drive cages in my E9105Z?

The compact ATX form factor is designed for increased compatibility with legacy HP chassis such as the E9105Z and E9120Y.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.