Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
A rectangular silver ATX power supply with a single fan and multiple cable connectors

Gulfe

Gulfe ATX power supply for HP Pavilion Elite M9080N M9105Z

SKU CH-MZ59-3ZN36

ATX power supply with reduced depth, 24-pin and 4-pin CPU connectors, three SATA and two LP4 plugs, 115/230 V input and over-current protection

  • TypeATX
  • Fans1
  • Weight2.5
  • Replaces legacy units in HP Pavilion Elite M9080N and M9105Z
  • Reduced depth design measures 5.9 inches height by 3.4 inches width
  • Over current and over power protection safeguards components
  • High efficiency ATX form factor with 115/230 V input range
  • Includes 24-pin ATX, 4-pin CPU, three SATA, two LP4 and floppy connectors

Replacement ATX PSU for HP Pavilion Elite

This Gulfe ATX power supply replaces the original unit in HP Pavilion Elite M9080N and M9105Z desktops. It delivers the standard output rails including +5V, -5V, +12V1, +12V2, +3.3V, -12V and +5V-SB. A single fan cools the unit which weighs 2.5 and measures 5.9" Height x 3.4" Width. It is a new component supplied for legacy system maintenance.

Upgrades legacy OEM units with reduced depth

The reduced depth design increases compatibility inside compact HP chassis where standard-length units may not fit. It replaces several older legacy power supplies that lack modern protection features. Over current and over power protection safeguard connected hardware. The jump is worth it when the original PSU fails or shows instability under load.

ATX connector layout limits expansion

Connectors provided are one ATX 24 (20+4) pin, one P4 12V 4 pin, three SATA 15 pin, two LP4 4 pin and one floppy 4 pin. No PCIe power connectors are present so discrete graphics cards requiring external power cannot be supported. Builders needing more SATA devices or modern GPU power must look elsewhere. The fixed cable set defines the practical device limit.

Kohokohdat

  • Replaces legacy units in HP Pavilion Elite M9080N and M9105Z
  • Reduced depth design measures 5.9 inches height by 3.4 inches width
  • Over current and over power protection safeguards components
  • High efficiency ATX form factor with 115/230 V input range
  • Includes 24-pin ATX, 4-pin CPU, three SATA, two LP4 and floppy connectors

Tekniset tiedot

BrandGulfe
TypeATX
Fans1
Weight2.5

Kysymyksiä tästä tuotteesta

What are the exact dimensions I need to clear in my HP Pavilion Elite M9080N case?

The unit measures 5.9 inches high by 3.4 inches wide with a reduced depth design for increased compatibility in the M9080N and M9105Z chassis.

Which power connectors must I attach to the motherboard and drives during installation?

Connect the 24-pin ATX (20+4) main plug, the P4 4-pin CPU cable, three SATA 15-pin leads for drives, two LP4 4-pin peripherals and the floppy 4-pin if required.

When should I plan to replace the internal cooling fan?

The single built-in fan is the only moving part; replace it when bearing noise appears or airflow drops, typically after several years of continuous operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.