Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

HP

HP 647654-081 32GB DDR3L ECC Registered DIMM

SKU CH-KR4A-8EK8N MPN 647654-081

A 32 GB DDR3L ECC registered DIMM running at 1333 MHz and 1.35 V for HP ProLiant BL660c Gen8 blade servers

  • TypeRAM Module
  • 32 GB capacity for large server workloads
  • Low 1.35 V DDR3L voltage reduces power draw
  • ECC registered design protects data integrity
  • 1333 MHz CL9 speed matches ProLiant BL660c Gen8 spec
  • 240-pin DIMM fits HP ProLiant BL660c Gen8 blade server

32GB DDR3L ECC Registered DIMM

This HP 647654-081 module provides 32GB of DDR3L SDRAM at 1.35V. It runs at 1333MHz with CL9 latency and uses a 240-pin DIMM form factor. Error-correcting code and registered signal processing are built in.

Who this suits and who it does not

Suits administrators upgrading an HP ProLiant BL660c Gen8 blade server that requires registered ECC memory. Not for desktop PCs, laptops or workstations that accept only unbuffered non-ECC modules. Not for systems needing speeds above 1333MHz or voltages other than 1.35V.

Deciding specification — DDR3L 1333MHz registered

The module follows the DDR3-1333/PC3L-10600 standard with registered ECC signalling. This combination determines compatibility with the target server platform. Verify that the motherboard supports registered DDR3L DIMMs before purchase.

Kohokohdat

  • 32 GB capacity for large server workloads
  • Low 1.35 V DDR3L voltage reduces power draw
  • ECC registered design protects data integrity
  • 1333 MHz CL9 speed matches ProLiant BL660c Gen8 spec
  • 240-pin DIMM fits HP ProLiant BL660c Gen8 blade server

Tekniset tiedot

BrandHP
TypeRAM Module
Lähetyspaino2.31 kg
Pakkauksen mitat254 × 140 × 89 mm

Kysymyksiä tästä tuotteesta

Does my HP ProLiant BL660c Gen8 blade server need a 240-pin DDR3L slot to accept the 647654-081 module?

Yes — the 647654-081 is a 240-pin DDR3L DIMM, so the server must provide a matching DDR3L memory slot.

Can I mix this 1.35 V registered ECC DIMM with older 1.5 V DDR3 modules in the same BL660c Gen8?

No — the 647654-081 runs at 1.35 V and uses registered ECC signalling; mixing voltages or buffering types will prevent the server from posting.

After installation, how do I confirm the 32 GB module is running at 1333 MHz with CL9 timings?

Check the BIOS memory information or run a tool such as dmidecode; it should report 32 GB, DDR3L-1333, CL9, registered ECC.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.