Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 1U rack server with eight front drive bays

HP

HP ProLiant DL160 Gen9 1U rack server 2× Xeon E5-2630 v3 2.4GHz 128GB DDR4 2× 500GB SATA

SKU CH-D584-8CJQM

A 1U rack server with dual Xeon E5-2630 v3 processors, 128GB DDR4 memory, and two 500GB SATA drives using B140i software RAID

  • TypeRack
  • Rack Height1U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon E5 v3
  • MAX Processors2
  • ChipsetIntel C610

Installed Memory Size 128GB

HDD 2 x 500GB

  • Dual 8-core Xeon CPUs deliver 32 threads for parallel workloads
  • 128GB DDR4 ECC memory fills all 16 DIMM slots for maximum capacity
  • Two 500GB 7.2K enterprise SATA drives provide mirrored storage out of the box
  • B140i controller supports RAID 0, 1 and 5 for data protection options
  • Redundant 550W hot-swap power supplies keep the 1U rack server running

Compact 1U dual-socket server

The HP ProLiant DL160 Gen9 packs two Xeon E5-2630 v3 processors and 128 GB of DDR4 into a 1U rack chassis. Eight small-form-factor drive bays and redundant hot-swap power supplies support continuous operation in dense environments.

Suits buyers needing high core count

The system arrives at its 128 GB memory ceiling and uses SATA-only RAID, so it cannot take SAS drives. Buyers who want more storage bays or hardware RAID should look at a larger chassis.

B140i software RAID limits drive choice

The onboard controller handles RAID 0, 1 and 5 but only with SATA disks, so the two installed 500 GB drives define the starting array. Any expansion must stay within the SATA interface.

Kohokohdat

  • Dual 8-core Xeon CPUs deliver 32 threads for parallel workloads
  • 128GB DDR4 ECC memory fills all 16 DIMM slots for maximum capacity
  • Two 500GB 7.2K enterprise SATA drives provide mirrored storage out of the box
  • B140i controller supports RAID 0, 1 and 5 for data protection options
  • Redundant 550W hot-swap power supplies keep the 1U rack server running

Tekniset tiedot

BrandHP
SeriesProLiant
ModelProliant DL160 G9
TypeRack
Rack Height1U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon E5 v3
MAX Processors2
ChipsetIntel C610
Installed Memory Size128GB
Memory TypeDDR4
Max Memory Capacity128GB
Memory Features16 DIMM slots, 8 per processor. (4GB/8GB/16GB/32GB/64GB DDR4 up to 2400MT/s ECC Registered, actual memory speed dependent on the processor capability).
Number of Memory Slots16
Storage ControllerB140i Software RAID
HDD InterfaceSATA
SSD (Installed)No
Raid Level0,1,5
Media DrivesNone
GPU TypeMatrox G200
Video Memory16MB
Remote ManagementiLO Management (standard).
LAN Ports2 x Ports
Expansion SlotsCPU1 PCIe Riser 1: 2 PCIe 3.0 Slots (1 & 2) available: 1x Full-Height Half Length, 1x Low Profile slot. Optional kit available to install Flexible LOM in slot 1. CPU 2 Riser (Optional): PCIe 3.0 slot 3 - Full-Height Half Height (Secondary PCIe Riser and dual CPU required).
Operating SystemNo
Compatible/Certified OSMicrosoft Windows Small Business Server 2011/2008, Microsoft Windows Server 2008 R2 SP1/SP2, Microsoft Windows HPC Server 2008 R2, Novell SUSE Linux Enterprise Server, Red Hat Enterprise Linux, Oracle Solaris
Weight63.0000LBS

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How much power do the dual 550 W supplies draw when both CPUs run at 2.4 GHz under full load?

Each supply is rated at 550 W; the redundant hot-swap design shares load so neither unit exceeds its rating during sustained operation.

Which drive trays and cables must I already have to populate the remaining six 2.5″ bays?

The chassis accepts standard SFF trays with SATA connectors; the B140i controller supports RAID 0, 1, 5 on SATA drives only.

Will the Matrox G200 graphics and B140i RAID work with a legacy PCIe x8 SAS HBA I want to keep?

The Matrox G200 provides basic video output; adding a PCIe SAS HBA is supported, but the onboard B140i remains SATA-only.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.