Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 1U rack server with eight 2.5-inch drive bays visible at the front

HP

HP ProLiant DL160 Gen9 1U rack server E5-2650 v3 10-core 2.3 GHz 16 GB DDR4 2×500 GB SATA B140i

SKU CH-65RH-B9YHN

1U rack server with a 10-core Xeon at 2.3 GHz, 16 GB DDR4, and two 500 GB SATA drives on B140i RAID

  • TypeRack
  • Rack Height1U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon E5 v3
  • MAX Processors2
  • ChipsetIntel C610

Installed Memory Size 16GB

HDD 2 x 500GB

  • 10-core Xeon at 2.3 GHz powers demanding workloads
  • 16 GB DDR4 ECC memory supports up to 1 TB total
  • Two 500 GB 7.2K SATA drives in hot-swap bays
  • B140i controller provides RAID 0, 1, 5 for SATA
  • Redundant 550 W hot-swap power supplies ensure uptime

1U rack server with dual SATA drives

The HP ProLiant DL160 Gen9 is a 1U rack server built around a single Intel Xeon E5-2650 v3 processor with ten cores at 2.3 GHz. It ships with 16 GB of DDR4 memory and two 500 GB 7.2K SATA drives managed by the B140i software RAID controller. Redundant hot-swap power supplies are included.

Suits single-processor workloads needing basic

This configuration fits environments that run on one CPU and rely on software RAID levels 0, 1 or 5 for SATA drives only. Buyers who need hardware RAID, SAS connectivity or a second processor should look elsewhere. The Matrox G200 graphics adapter provides console output but no compute acceleration.

B140i software RAID limited to SATA drives

The storage controller supports RAID 0, 1 and 5 exclusively on SATA media. SAS or other interfaces are not supported by this controller. The eight SFF bays currently hold two 500 GB drives, leaving six bays available for additional SATA capacity.

Kohokohdat

  • 10-core Xeon at 2.3 GHz powers demanding workloads
  • 16 GB DDR4 ECC memory supports up to 1 TB total
  • Two 500 GB 7.2K SATA drives in hot-swap bays
  • B140i controller provides RAID 0, 1, 5 for SATA
  • Redundant 550 W hot-swap power supplies ensure uptime

Tekniset tiedot

BrandHP
SeriesProLiant
ModelProliant DL160 G9
TypeRack
Rack Height1U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon E5 v3
MAX Processors2
ChipsetIntel C610
Installed Memory Size16GB
Memory TypeDDR4
Max Memory Capacity16GB
Memory Features16 DIMM slots, 8 per processor. (4GB/8GB/16GB/32GB/64GB DDR4 up to 2400MT/s ECC Registered, actual memory speed dependent on the processor capability).
Number of Memory Slots16
Storage ControllerB140i Software RAID
HDD InterfaceSATA
SSD (Installed)No
Raid Level0,1,5
Media DrivesNone
GPU TypeMatrox G200
Video Memory16MB
Remote ManagementiLO Management (standard).
LAN Ports2 x Ports
Expansion SlotsCPU1 PCIe Riser 1: 2 PCIe 3.0 Slots (1 & 2) available: 1x Full-Height Half Length, 1x Low Profile slot. Optional kit available to install Flexible LOM in slot 1. CPU 2 Riser (Optional): PCIe 3.0 slot 3 - Full-Height Half Height (Secondary PCIe Riser and dual CPU required).
Operating SystemNo
Compatible/Certified OSMicrosoft Windows Small Business Server 2011/2008, Microsoft Windows Server 2008 R2 SP1/SP2, Microsoft Windows HPC Server 2008 R2, Novell SUSE Linux Enterprise Server, Red Hat Enterprise Linux, Oracle Solaris
Weight63.0000LBS

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the B140i controller and SATA drives work with my existing 6 Gbps SAS backplane?

The B140i Software RAID supports SATA only and the installed 500 GB 7.2K 6 Gbps 2.5" SATA drives connect directly to the SATA backplane; SAS drives are not supported by this controller.

How can I verify the single E5-2650 v3 is running at 2.3 GHz with all 10 cores active?

Check BIOS/UEFI or the iLO interface — both will show one Xeon E5-2650 v3 at 2.3 GHz with 10 cores and 20 threads via hyper-threading.

What comes in the box and what must I buy separately for the 8-bay SFF chassis?

Includes server with one E5-2650 v3, 16 GB DDR4, two 500 GB SATA drives in trays, B140i RAID, 550 W redundant power, Matrox G200; OS, extra CPUs, memory, drives and media bay are not included.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.