Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
1U silver rack server with front drive bays

HPE

HPE 5118 Xeon Gold 2.30 GHz 12-core 64 GB 3.60 TB SAS rack server

SKU CH-Z5YT-09ZSH MPN 5118

A 1U rack server with a 12-core Xeon Gold at 2.30 GHz, 64 GB DDR4 and 3.60 TB of SAS storage across six hot-swap bays

  • TypeRack
  • 12-core Xeon Gold at 2.30 GHz handles demanding workloads
  • 64 GB DDR4 memory supports multi-application performance
  • 60 TB SAS storage across six hot-swap bays
  • Dual power-supply slots with one 500 W unit installed
  • 1U rack form factor fits dense data-centre deployments

Ready-to-run 1U Xeon Gold server

This HPE ProLiant DL360 G10 appliance arrives with one Xeon Gold 5118 processor at 2.30 GHz and twelve cores. Sixty-four gigabytes of DDR4 memory are installed across twenty-four slots. Six 600 GB SAS drives in hot-swap bays provide 3.60 TB of RAID 10 storage. A single 500 W supply powers the unit with a second bay available for redundancy.

Slide-in rails and hot-swap drives simplify

The 1U rack form factor fits standard cabinets and the included rails allow tool-less installation. Hot-swap drive carriers let you replace disks without shutting down. The single installed processor leaves the second socket empty; adding a matching Xeon Gold 5118 later requires identical stepping and microcode revision. Memory population rules for twenty-four DDR4 slots must be followed to avoid boot failures.

Verify rack depth power and network before ordering

Confirm your cabinet depth accommodates the chassis and cable routing. Two power cords are needed for full redundancy; a single cord leaves the system without failover. The on-board Gigabit Ethernet ports provide management and data connectivity; additional NICs may be required for segmented networks. Ensure the SAS RAID 10 array meets your capacity and performance expectations.

Kohokohdat

  • 12-core Xeon Gold at 2.30 GHz handles demanding workloads
  • 64 GB DDR4 memory supports multi-application performance
  • 60 TB SAS storage across six hot-swap bays
  • Dual power-supply slots with one 500 W unit installed
  • 1U rack form factor fits dense data-centre deployments

Tekniset tiedot

TypeRack

Kysymyksiä tästä tuotteesta

How can I verify the 5118 Xeon Gold processor is running at 2.30 GHz with all 12 cores active after installation?

Use the HPE iLO management interface or BIOS system information screen to confirm the processor model 5118 shows 12 cores operating at 2.30 GHz base frequency.

What components are included with the R1V82A server and what must be purchased separately?

The server includes one 5118 Xeon Gold processor, 64 GB DDR4 memory, six 600 GB SAS hot-swappable drives totalling 3.60 TB, one 500 W power supply, and a SAS RAID controller supporting RAID 10. Additional processor, memory modules, power supply, and drives are optional upgrades.

Which memory configuration should I choose for the 24 available DDR4 slots?

The system ships with 64 GB standard memory. Populate the 24 slots in matched sets per processor channel for optimal DDR4 performance; maximum capacity depends on the DIMM density you select.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.