Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
3.5 inch HPE internal hard drive with SmartDrive carrier

HPE

HPE 695842-001 4 TB 3.5" 7200 RPM SAS internal hard drive

SKU CH-B457-1X8W1 MPN 695842-001

A 4 TB internal hard drive with a SAS 6Gb/s interface, 7200 RPM spindle speed and a 3.5 inch form factor

  • InterfaceSAS 6Gb/s
  • Capacity4TB
  • NAND Flash Memory TypeSLC
  • RPM7200 RPM
  • Form Factor3.5"
  • 4 TB capacity stores large datasets
  • 7200 RPM spindle speed delivers responsive data access
  • SAS 6Gb/s interface enables fast host communication
  • 5 inch form factor fits standard drive bays
  • HP StoreVirtual 4530 compatibility simplifies integration

4 TB SAS drive for server storage

This HPE 695842-001 drive delivers 4 TB of capacity through a 6Gb/s SAS interface. The 7200 RPM spindle speed supports steady throughput for bulk data workloads. It fits 3.5 inch internal bays and includes a SmartDrive carrier for tool-less installation. Designed as an HP Qualified Option for StoreVirtual 4530 environments.

Capacity and headroom for archival workloads

Four terabytes accommodate large backup sets, media archives and database files. The SAS link provides consistent bandwidth for sequential reads and writes. Random I/O performance tapers off under heavy multi-threaded queues typical of virtualisation hosts. Workloads demanding sub-millisecond latency will exceed the mechanical limits of this drive.

Thermals, noise and power in normal use

The 7200 RPM mechanism generates moderate vibration and audible seek noise in quiet racks. Power draw rises during spin-up and sustained writes, then settles at typical idle levels for 3.5 inch SAS drives. Standard server airflow keeps temperatures within the rated operating range without special cooling. Acoustic output is noticeable in desktop chassis but masked by fan noise in data-centre cabinets.

Kohokohdat

  • 4 TB capacity stores large datasets
  • 7200 RPM spindle speed delivers responsive data access
  • SAS 6Gb/s interface enables fast host communication
  • 5 inch form factor fits standard drive bays
  • HP StoreVirtual 4530 compatibility simplifies integration

Tekniset tiedot

BrandHPE
Model695842-001
InterfaceSAS 6Gb/s
Capacity4TB
NAND Flash Memory TypeSLC
RPM7200 RPM
Form Factor3.5"
Lähetyspaino1.36 kg
Pakkauksen mitat203 × 89 × 25 mm

Kysymyksiä tästä tuotteesta

Will the 6Gb/s SAS interface on this 695842-001 drive work with my existing 3Gb/s SAS backplane?

The drive uses a 6Gb/s SAS interface which is backward compatible with 3Gb/s SAS controllers and backplanes, so it will operate at the slower 3Gb/s speed when connected to older hardware.

How can I verify the 7200 RPM spindle speed is running correctly after installing the 4 TB drive?

Check the drive's reported rotational speed in your server's BIOS, HPE Smart Storage Administrator, or operating system disk utilities; they should show 7200 RPM for this model.

Does the 695842-001 come with the SmartDrive carrier shown in the product name, or must I order the 3.5" tray separately?

The product name specifies "Hard Drive with SmartDrive Carrier", meaning the 3.5" carrier is included in the box; no separate tray purchase is required for installation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.