HPE
HPE 861686-B21 1TB SATA 7200 RPM 3.5" internal hard drive
1 TB 7200 RPM SATA 3.5" internal hard drive for HPE Apollo 4200 Gen9 Server
- PackagingBare Drive
- InterfaceSATA 6.0Gb/s
- Capacity1TB
- NAND Flash Memory TypeHard Drive
- RPM7200 RPM
- Form Factor3.5"
- 1 TB capacity for bulk storage
- 7200 RPM spindle speed for responsive data access
- SATA 6.0 Gb/s interface for wide system compatibility
- 5 inch form factor fits standard drive bays
- Validated for HPE Apollo 4200 Gen9 server integration
HPE 1TB 3.5" SATA drive
The HPE 861686-B21 is a 1 TB internal hard drive with a 3.5 inch form factor and a 7200 RPM spindle speed. It connects through a SATA 6.0Gb/s interface and is supplied as a bare drive. The unit is rated for server environments such as the HPE Apollo 4200 Gen9.
Ideal for bulk storage in compatible servers
This drive suits administrators adding high-capacity 7.2K storage to supported HPE server bays. It is not for systems that require 2.5 inch form factors or drives with different interface standards. Buyers needing solid-state performance or a smaller physical size should consider other options.
SATA 6.0Gb/s interface decides compatibility
The single specification that determines fit is the SATA 6.0Gb/s interface combined with the 3.5 inch LFF form factor. Verify that the target chassis accepts 3.5 inch SATA drives before purchase. The drive carries a one-year limited warranty from the manufacturer.
Kohokohdat
- 1 TB capacity for bulk storage
- 7200 RPM spindle speed for responsive data access
- SATA 6.0 Gb/s interface for wide system compatibility
- 5 inch form factor fits standard drive bays
- Validated for HPE Apollo 4200 Gen9 server integration
Tekniset tiedot
| Brand | HPE ISS |
|---|---|
| Model | 861686-B21 |
| Packaging | Bare Drive |
| Interface | SATA 6.0Gb/s |
| Capacity | 1TB |
| NAND Flash Memory Type | Hard Drive |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
| Lähetyspaino | 1.13 kg |
| Pakkauksen mitat | 533 × 235 × 146 mm |
Kysymyksiä tästä tuotteesta
Does my server need a 3.5" drive bay and a SATA 6.0Gb/s port to install this 1TB hard drive?
Yes, the drive fits a standard 3.5-inch bay and connects through a SATA 6.0Gb/s interface, so the host must provide both.
Will this 7200 RPM SATA drive work in an older system that only supports SATA 3.0Gb/s?
The SATA 6.0Gb/s interface is backward compatible and will negotiate down to 3.0Gb/s on older controllers.
How can I verify the 861686-B21 is running at its rated 7200 RPM after installation?
Check the spindle speed reported in the server BIOS or use a SMART monitoring tool that displays the current RPM value.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
