Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver rectangular blade server with front drive bays and connector edge

HPE

HPE BL460c G10 Blade Server 2x Xeon Bronze 3104 48GB 2x 300GB SAS

SKU CH-5X4X-YRV7Y

Blade server with dual Xeon Bronze 3104 processors at 1.7 GHz, 48 GB DDR4 memory, and two 300 GB SAS drives

  • TypeBlade
  • CPU TypeIntel Xeon
  • CPU Speed1.7 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size48GB
  • Dual Xeon Bronze 3104 CPUs deliver 12 cores at 1.7 GHz for parallel workloads
  • 48 GB DDR4 ECC memory supports virtualisation density up to 128 GB maximum
  • Dual 300 GB 10K SAS drives on Smart Array P204i-b provide fast redundant storage
  • Integrated iLO Advanced remote management enables lights-out monitoring and firmware updates
  • FlexFabric 20 Gb 2-port adapter supplies high-throughput networking for blade environments

HPE BL460c G10 Dual Xeon Blade

The HPE BL460c G10 is a half-height blade server built for dense compute environments. It ships new with two Xeon Bronze 3104 processors at 1.7 GHz, 48 GB of DDR4 memory and dual 300 GB SAS hard drives. Integrated Lights-Out Advanced remote management is included.

Suits virtualisation hosts needing dual-socket

Buyers who need more than 128 GB of RAM should look elsewhere. Workloads that require GPU acceleration or more than two internal 2.5-inch drives are not supported by this blade.

Dual Xeon Bronze 3104 configuration

The pair of 6-core Xeon Bronze 3104 CPUs defines the processing ceiling. Confirm the chassis accepts Gen10 half-height blades and that the power and cooling budget covers the installed processors.

Kohokohdat

  • Dual Xeon Bronze 3104 CPUs deliver 12 cores at 1.7 GHz for parallel workloads
  • 48 GB DDR4 ECC memory supports virtualisation density up to 128 GB maximum
  • Dual 300 GB 10K SAS drives on Smart Array P204i-b provide fast redundant storage
  • Integrated iLO Advanced remote management enables lights-out monitoring and firmware updates
  • FlexFabric 20 Gb 2-port adapter supplies high-throughput networking for blade environments

Tekniset tiedot

BrandHP
SeriesProliant BL
ModelBlade
TypeBlade
CPU TypeIntel Xeon
CPU Speed1.7 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size48GB
Memory TypeDDR4 SDRAM
Max Memory Capacity128GB
Hard Drive (Installed)600,00
Storage ControllerHP Smart Array P204i-b SR Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementIntegrated Lights-Out (iLO) Advanced
Dimensions22 x 22x 10 in
Weight20

Kysymyksiä tästä tuotteesta

Does this blade require an HPE c-Class enclosure and a compatible interconnect module to operate?

Yes, the BL460c G10 is a half-height blade that must be installed in an HPE c-Class enclosure with appropriate interconnect modules for network and storage connectivity.

Can the integrated Smart Array P204i-b SR controller manage SAS drives from earlier ProLiant generations?

The P204i-b SR Gen10 controller supports 12 Gb/s SAS and is backward compatible with 6 Gb/s and 3 Gb/s SAS drives installed in the same enclosure.

How do I verify the 2x Xeon Bronze 3104 processors and 48GB DDR4 are recognised after installation?

During POST, the System ROM screen lists both 1.7 GHz 6-core CPUs and shows 48GB total memory; iLO 5 also reports the full inventory in the System Information view.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.