Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular silver blade server with front drive bays and handle

HPE

HPE BL460c G10 Blade Server 2x Xeon Gold 5220 128GB DDR4 2x 4TB SATA

SKU CH-7G66-YA2SE

Dual Xeon Gold 5220 blade with 128GB DDR4 and two 4TB SATA drives, managed by iLO Advanced

  • TypeBlade
  • CPU TypeIntel Xeon
  • CPU Speed2.2 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size128GB
  • Dual Xeon Gold 5220 processors provide 18 cores each at 2.2 GHz
  • 128GB DDR4 memory installed for demanding workloads
  • 2x 4TB SATA drives offer 8TB total storage
  • Smart Array P204i-b SR controller manages RAID
  • Integrated iLO Advanced enables remote management

Blade Server for Virtualised Workloads

The HPE BL460c G10 is a half-height blade system supplied with two Xeon Gold 5220 processors running at 2.2 GHz and 18 cores each. It ships with 128 GB of DDR4 ECC registered memory and a Smart Array P204i-b SR Gen10 controller managing two 4 TB SATA 2.5-inch hard drives. Integrated iLO Advanced remote management and a FlexFabric 20 Gb 2-port 650FLB adapter provide out-of-band control and high-speed networking for dense data-centre deployments.

Suited for Memory-Bound Consolidation.

This configuration targets organisations consolidating virtual machines or running in-memory databases that benefit from the installed 128 GB DDR4 capacity and dual-processor throughput. The chassis supports only two 2.5-inch drive bays, so environments needing additional internal storage bays or discrete GPU acceleration must evaluate alternative platforms.

Installed Memory Fixed at 128 GB DDR4

The system arrives with 128 GB of DDR4 memory already populated and the specification lists 128 GB as the maximum supported capacity, meaning no further memory expansion is possible without replacing modules. Buyers anticipating future RAM growth should verify this limit matches their roadmap before purchase.

Kohokohdat

  • Dual Xeon Gold 5220 processors provide 18 cores each at 2.2 GHz
  • 128GB DDR4 memory installed for demanding workloads
  • 2x 4TB SATA drives offer 8TB total storage
  • Smart Array P204i-b SR controller manages RAID
  • Integrated iLO Advanced enables remote management

Tekniset tiedot

BrandHP
SeriesProliant BL
ModelBlade
TypeBlade
CPU TypeIntel Xeon
CPU Speed2.2 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size128GB
Memory TypeDDR4 SDRAM
Max Memory Capacity128GB
Hard Drive (Installed)8,00
Storage ControllerHP Smart Array P204i-b SR Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementIntegrated Lights-Out (iLO) Advanced
Dimensions22 x 22x 10 in
Weight20

Kysymyksiä tästä tuotteesta

Which enclosure do I need to install this BL460c G10 blade?

This half-height blade fits an HPE c-Class enclosure that provides power, cooling and interconnects for the 2 x Xeon Gold 5220 processors and 128 GB DDR4 memory.

Can I keep my existing SATA drives and add them to the server?

The Smart Array P204i-b SR Gen10 controller supports the 2 x 4 TB SATA 2.5" drives installed; additional SATA drives can be added to the enclosure's remaining drive bays.

How do I verify the blade is operating correctly after installation?

Use HPE iLO Advanced remote management to check BIOS and firmware versions, run the integrated diagnostics, and confirm both 18-core CPUs at 2.2 GHz and 128 GB DDR4 are reported.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.