Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver rectangular blade server with front drive bays and connector edge

HPE

HPE BL460c G10 Blade Server 2x Xeon Gold 6128 48GB DDR4 2x 4TB SATA

SKU CH-VC67-BQAFQ

Blade server with dual Xeon Gold 6128 CPUs at 3.4 GHz, 48 GB DDR4 memory and two 4 TB SATA drives

  • TypeBlade
  • CPU TypeIntel Xeon
  • CPU Speed3.4 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size48GB
  • Dual Xeon Gold 6128 CPUs deliver 3.4 GHz processing power
  • 48GB DDR4 ECC memory supports demanding virtualisation workloads
  • Two 4TB SATA drives provide 8TB total storage capacity
  • Smart Array P204i-b SR controller enables hardware RAID protection
  • Integrated iLO Advanced allows full remote server management

HPE BL460c G10 Blade Server

This new HPE BL460c G10 blade server fits a c-Class enclosure and runs two Intel Xeon Gold 6128 processors at 3.4 GHz. It ships with 48 GB of DDR4 ECC registered memory and two 4 TB SATA 2.5-inch drives managed by a Smart Array P204i-b SR controller. Integrated iLO Advanced remote management is included.

Suits density-focused workloads

The half-height blade form factor and dual-processor layout suit virtualization clusters, database nodes, and HPC tasks that need many cores in a single slot. Buyers who want more storage bays, GPU acceleration, or a standalone rackmount chassis should look at other platforms.

Dual Xeon Gold 6128 configuration

Two Gold 6128 CPUs provide 12 total cores and 19.25 MB of cache per processor, defining the compute ceiling for this blade. Memory can be expanded to 128 GB across the available DIMM slots if the workload demands it.

Kohokohdat

  • Dual Xeon Gold 6128 CPUs deliver 3.4 GHz processing power
  • 48GB DDR4 ECC memory supports demanding virtualisation workloads
  • Two 4TB SATA drives provide 8TB total storage capacity
  • Smart Array P204i-b SR controller enables hardware RAID protection
  • Integrated iLO Advanced allows full remote server management

Tekniset tiedot

BrandHP
SeriesProliant BL
ModelBlade
TypeBlade
CPU TypeIntel Xeon
CPU Speed3.4 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size48GB
Memory TypeDDR4 SDRAM
Max Memory Capacity128GB
Hard Drive (Installed)8,00
Storage ControllerHP Smart Array P204i-b SR Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementIntegrated Lights-Out (iLO) Advanced
Dimensions22 x 22x 10 in
Weight20

Kysymyksiä tästä tuotteesta

Does this blade need an HPE c-Class enclosure to operate?

Yes, the BL460c Gen10 is a half-height blade that must be installed in an HPE c-Class enclosure for power, cooling and network connectivity.

Can I keep the existing FLEXFABRIC 20GB 2-PORT 650FLB adapter when adding this blade to my c-Class chassis?

The blade includes a FLEXFABRIC 20GB 2-PORT 650FLB adapter, so it will interoperate with the same module in other bays of a c-Class enclosure.

How can I verify the Smart Array P204i-b SR controller sees both 4TB SATA drives after installation?

During POST press F10 to enter Intelligent Provisioning, then open the Storage section to confirm both 4TB SATA drives are detected and configured.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.