Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular silver blade server module with front drive bays and connector edge

HPE

HPE BL460c G10 Blade Server 2x Xeon Gold 6152 32GB 2x 1.8TB SAS

SKU CH-NC7B-NDS5Z

A blade server with dual 2.1 GHz Xeon Gold 6152 CPUs, 32 GB DDR4 memory and two 1.8 TB SAS drives

  • TypeBlade
  • CPU TypeIntel Xeon
  • CPU Speed2.1 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size32GB
  • Dual Xeon Gold 6152 processors provide 22 cores each at 2.1 GHz
  • 32 GB DDR4 ECC registered memory installed with capacity up to 128 GB
  • Two 1.8 TB SAS hard drives on Smart Array P204i-b SR controller
  • Integrated iLO Advanced remote management for lights-out administration
  • Half-height blade form factor fits dense HPE c-Class enclosures

Dual-Socket Blade with Xeon Gold 6152

The HPE BL460c G10 is a half-height blade server fitted with two Intel Xeon Gold 6152 processors running at 2.1 GHz. It arrives with 32 GB of DDR4 ECC registered memory and two 1.8 TB SAS hard drives managed by a Smart Array P204i-b SR controller. Integrated Lights-Out Advanced provides remote management.

Suits dense compute clusters.

This blade suits virtualisation hosts and high-density compute clusters that need many cores in a small enclosure slot. Buyers who need more than 128 GB of RAM or more than two 2.5-inch drive bays should look at a different platform.

128 GB maximum DDR4 capacity

The server supports up to 128 GB of DDR4 memory across its DIMM slots. That ceiling decides whether the blade can hold your working set or whether you need a system with a higher memory limit.

Kohokohdat

  • Dual Xeon Gold 6152 processors provide 22 cores each at 2.1 GHz
  • 32 GB DDR4 ECC registered memory installed with capacity up to 128 GB
  • Two 1.8 TB SAS hard drives on Smart Array P204i-b SR controller
  • Integrated iLO Advanced remote management for lights-out administration
  • Half-height blade form factor fits dense HPE c-Class enclosures

Tekniset tiedot

BrandHP
SeriesProliant BL
ModelBlade
TypeBlade
CPU TypeIntel Xeon
CPU Speed2.1 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size32GB
Memory TypeDDR4 SDRAM
Max Memory Capacity128GB
Hard Drive (Installed)3,60
Storage ControllerHP Smart Array P204i-b SR Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementIntegrated Lights-Out (iLO) Advanced
Dimensions22 x 22x 10 in
Weight20

Kysymyksiä tästä tuotteesta

What enclosure slot width does the BL460c G10 blade require?

The half-height blade occupies a single slot in a supported HPE c-Class enclosure.

How do I install the two 1.8 TB SAS drives and the Smart Array P204i-b SR controller?

Slide the 2.5-inch drives into the front bays, then enable the controller in UEFI and create the RAID volume before installing the OS.

What memory upgrades does the server support later?

You can add DDR4 ECC registered DIMMs up to the 128 GB maximum across the available slots.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.