Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
HPE BL460c G10 blade server half-height silver chassis

HPE

HPE BL460c G10 blade server 2x Xeon Gold 6152 64GB DDR4 2x 1.8TB SAS

SKU CH-60P8-XF8M1

A dual-processor blade server with two 2.1 GHz Xeon Gold 6152 CPUs, 64GB DDR4 memory and two 1.8TB SAS drives

  • TypeBlade
  • CPU TypeIntel Xeon
  • CPU Speed2.1 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size64GB
  • Dual Xeon Gold 6152 processors provide 2.1 GHz performance
  • 64 GB DDR4 memory supports demanding workloads
  • 2x 1.8 TB SAS drives offer high-capacity storage
  • Smart Array P204i-b SR controller manages RAID arrays
  • iLO Advanced enables remote server management

Blade server for dense compute

The HPE BL460c Gen10 blade server packs two Xeon Gold 6152 processors running at 2.1 GHz with 22 cores each. Sixty-four gigabytes of DDR4 ECC registered memory and two 1.8 TB SAS hard drives are installed. Integrated iLO Advanced remote management and a Smart Array P204i-b SR controller complete the configuration.

Check enclosure and fabric compatibility

Verify the blade enclosure has an available full-height slot and that its mid-plane supports the FlexFabric 20 Gb 2-port 650FLB adapter fitted to this unit. Confirm the Smart Array P204i-b SR controller firmware is aligned with the enclosure management module. Memory expansion stops at 128 GB total across the two processors.

Half-height blade with hot-plug drives

The blade measures 22 by 22 by 10 inches and weighs 20 pounds, designed for tool-less insertion into a supported enclosure. Two 2.5-inch SAS drive bays sit behind a hot-plug carrier for drive swaps without powering down. Integrated graphics handles console output while iLO provides dedicated out-of-band access over the network.

Kohokohdat

  • Dual Xeon Gold 6152 processors provide 2.1 GHz performance
  • 64 GB DDR4 memory supports demanding workloads
  • 2x 1.8 TB SAS drives offer high-capacity storage
  • Smart Array P204i-b SR controller manages RAID arrays
  • iLO Advanced enables remote server management

Tekniset tiedot

BrandHP
SeriesProliant BL
ModelBlade
TypeBlade
CPU TypeIntel Xeon
CPU Speed2.1 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size64GB
Memory TypeDDR4 SDRAM
Max Memory Capacity128GB
Hard Drive (Installed)3,60
Storage ControllerHP Smart Array P204i-b SR Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementIntegrated Lights-Out (iLO) Advanced
Dimensions22 x 22x 10 in
Weight20

Kysymyksiä tästä tuotteesta

What components are included in the HPE BL460c G10 blade and what must be purchased separately?

The blade ships with two Xeon Gold 6152 processors, 64GB DDR4 ECC registered memory, two 1.8TB SAS hard drives, a Smart Array P204i-b SR Gen10 RAID controller and an integrated FlexFabric 20GB 2-port 650FLB adapter. A rail kit is available on request.

Should I choose the 64GB DDR4 configuration or expand toward the 128GB maximum for this blade?

The installed 64GB DDR4 ECC registered memory suits typical virtualization or database workloads; the board supports up to 128GB if your application set demands more capacity later.

What does the 2.1 GHz Xeon Gold 6152 speed mean for real-world throughput in this server?

Each Xeon Gold 6152 runs at 2.1 GHz with 22 cores and 30.25MB cache, providing strong multi-threaded performance for virtualization, database and compute-intensive tasks.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.