Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular silver blade server module with front drive bays and handle

HPE

HPE BL460c G10 Blade Server 2x Xeon Gold 6252 32GB 2x 1.8TB SAS

SKU CH-TGH5-MSQBV

Dual Xeon Gold 6252 blade server with 32 GB DDR4 memory and two 1.8 TB SAS drives for dense compute workloads

  • TypeBlade
  • CPU TypeIntel Xeon
  • CPU Speed2.1 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size32GB
  • Dual Xeon Gold 6252 processors provide 24 cores each at 2.1 GHz
  • 32 GB DDR4 ECC memory supports up to 128 GB capacity
  • Two 1.8 TB SAS drives on Smart Array P204i-b SR controller
  • HPE iLO Advanced remote management with latest firmware
  • Blade form factor fits 2.5 inch drive bays for dense deployment

Blade server for dual-processor workloads

The HPE BL460c G10 blade server ships with two Xeon Gold 6252 processors running at 2.1 GHz and 24 cores each. It includes 32 GB of DDR4 ECC registered memory and two 1.8 TB SAS hard drives managed by a Smart Array P204i-b SR controller. This configuration targets virtualisation hosts, database nodes or compute clusters that fit a half-height blade chassis.

Verify chassis power and networking before ordering

Confirm that your enclosure provides sufficient power and cooling for a dual-processor blade and that the backplane supports SAS drives. The unit includes a FlexFabric 20 Gb 2-port 650FLB adapter, so check switch compatibility and cabling for the chosen fabric. Ensure the iLO Advanced licence matches your management platform requirements.

Thermals noise and power draw in normal use

Dual 24-core CPUs and spinning SAS drives generate significant heat; the blade relies on shared chassis fans for cooling. Acoustic output depends on enclosure fan curves rather than the blade itself. Power consumption scales with CPU load and drive activity, so plan chassis power budgets around sustained multi-threaded workloads.

Kohokohdat

  • Dual Xeon Gold 6252 processors provide 24 cores each at 2.1 GHz
  • 32 GB DDR4 ECC memory supports up to 128 GB capacity
  • Two 1.8 TB SAS drives on Smart Array P204i-b SR controller
  • HPE iLO Advanced remote management with latest firmware
  • Blade form factor fits 2.5 inch drive bays for dense deployment

Tekniset tiedot

BrandHP
SeriesProliant BL
ModelBlade
TypeBlade
CPU TypeIntel Xeon
CPU Speed2.1 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size32GB
Memory TypeDDR4 SDRAM
Max Memory Capacity128GB
Hard Drive (Installed)3,60
Storage ControllerHP Smart Array P204i-b SR Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementIntegrated Lights-Out (iLO) Advanced
Dimensions22 x 22x 10 in
Weight20

Kysymyksiä tästä tuotteesta

What comes with the BL460c G10 blade and what must be purchased separately?

The blade includes two Xeon Gold 6252 CPUs, 32GB DDR4 memory, two 1.8TB SAS hard drives and a Smart Array P204i-b SR controller. An enclosure, power supplies and rail kit are not included.

Should I choose the 32GB configuration or expand toward the 128GB maximum?

Start with 32GB if the workload fits; add DDR4 modules later up to 128GB when demand grows.

What does the 2.1GHz clock speed mean for real-world throughput on this blade?

Each of the 24 cores per processor runs at 2.1GHz with 35.75MB cache, delivering high multi-thread performance for database and virtualization tasks.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.