Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular silver blade server module with front drive bays and connector edge

HPE

HPE BL460c G10 Blade Server 2x Xeon Silver 4210 48GB 2x 1.8TB SAS

SKU CH-6008-KH3X3

Dual Xeon Silver 4210 blade server with 48GB DDR4, 2x 1.8TB SAS storage and iLO Advanced remote management

  • TypeBlade
  • CPU TypeIntel Xeon
  • CPU Speed2.2 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size48GB
  • Dual Xeon Silver 4210 CPUs deliver 20 cores at 2.2 GHz
  • 48 GB DDR4 ECC memory supports 128 GB maximum capacity
  • 2x 1.8 TB SAS drives on Smart Array P204i-b controller
  • Integrated iLO Advanced enables remote server management
  • FlexFabric 20 Gb 2-port 650FLB adapter provides high-speed networking

Target Workload

This HPE BL460c G10 blade server arrives with two Xeon Silver 4210 processors at 2.2 GHz, 48 GB of DDR4 ECC registered memory, and a pair of 1.8 TB SAS hard drives managed by a Smart Array P204i-b SR controller. It is built for density-optimised compute in a standard blade enclosure.

Fit and Limits

The system suits IT teams that need a ready-to-run blade for virtualisation, general-purpose applications or legacy workloads that rely on SAS storage and integrated iLO Advanced remote management. Buyers who need more memory capacity than 48 GB or who require storage interfaces other than SAS should look elsewhere because this configuration maxes at 128 GB DDR4 and uses SAS hard drives only.

Deciding Spec

The installed memory sits at 48 GB DDR4 with a ceiling of 128 GB across the two processors, so the single figure that determines whether this blade fits the job is the 48 GB starting point.

Kohokohdat

  • Dual Xeon Silver 4210 CPUs deliver 20 cores at 2.2 GHz
  • 48 GB DDR4 ECC memory supports 128 GB maximum capacity
  • 2x 1.8 TB SAS drives on Smart Array P204i-b controller
  • Integrated iLO Advanced enables remote server management
  • FlexFabric 20 Gb 2-port 650FLB adapter provides high-speed networking

Tekniset tiedot

BrandHP
SeriesProliant BL
ModelBlade
TypeBlade
CPU TypeIntel Xeon
CPU Speed2.2 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size48GB
Memory TypeDDR4 SDRAM
Max Memory Capacity128GB
Hard Drive (Installed)3,60
Storage ControllerHP Smart Array P204i-b SR Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementIntegrated Lights-Out (iLO) Advanced
Dimensions22 x 22x 10 in
Weight20

Kysymyksiä tästä tuotteesta

How many additional DDR4 memory modules can be added to reach the 128 GB maximum?

The server holds 48 GB of DDR4 ECC registered memory today and supports up to 128 GB, so extra DIMMs can fill the remaining capacity.

Will the two 1.8 TB SAS drives and the Smart Array P204i-b SR controller become a bottleneck during sustained write workloads?

The dual 1.8 TB SAS drives connect through the Smart Array P204i-b SR controller, which manages RAID for the internal 2.5-inch bays.

What fan noise and heat output should be expected when both Xeon Silver 4210 processors run at 2.2 GHz continuously?

Each Xeon Silver 4210 is a 10-core CPU with 13.75 MB cache operating at 2.2 GHz, and the blade relies on the enclosure cooling system for thermal management.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.