Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver rectangular blade server with front drive bays and connector edge

HPE

HPE BL460c G10 Blade Server 2x Xeon Silver 4215 48GB 2x 900GB SAS

SKU CH-M1N7-Z9V72

Dual Xeon Silver 4215 blade server with 48GB DDR4 and two 900GB SAS drives

  • TypeBlade
  • CPU TypeIntel Xeon
  • CPU Speed2.5 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size48GB
  • Dual Xeon Silver 4215 processors at 2.5 GHz handle multi-threaded workloads
  • 48 GB DDR4 ECC memory protects data integrity under load
  • Two 900 GB SAS drives provide fast redundant storage
  • Smart Array P204i-b SR controller manages RAID without extra hardware
  • HPE iLO Advanced enables remote power and firmware control from anywhere

Blade server for dual-socket workloads

The HPE BL460c G10 fits a standard blade enclosure and ships with two Xeon Silver 4215 processors at 2.5 GHz, 48 GB of DDR4 ECC registered memory and two 900 GB SAS 10K drives. It is suited to virtualisation hosts, database nodes or compute clusters that need dense, rack-scale deployment.

Storage and memory limits

The Smart Array P204i-b SR controller manages only the two 2.5-inch bays provided, so total raw capacity is capped at 1.8 TB unless the drives are replaced. Memory can grow to 128 GB across the available DDR4 slots, but the installed 48 GB leaves headroom for typical dual-socket applications.

Integrated management and connectivity

iLO Advanced gives remote console, power control and firmware updates over a dedicated network link, while the FlexFabric 20 GB 2-port adapter handles both LAN and storage traffic. The blade form factor means no rails are needed inside a supported enclosure, reducing cabling and physical installation time.

Kohokohdat

  • Dual Xeon Silver 4215 processors at 2.5 GHz handle multi-threaded workloads
  • 48 GB DDR4 ECC memory protects data integrity under load
  • Two 900 GB SAS drives provide fast redundant storage
  • Smart Array P204i-b SR controller manages RAID without extra hardware
  • HPE iLO Advanced enables remote power and firmware control from anywhere

Tekniset tiedot

BrandHP
SeriesProliant BL
ModelBlade
TypeBlade
CPU TypeIntel Xeon
CPU Speed2.5 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size48GB
Memory TypeDDR4 SDRAM
Max Memory Capacity128GB
Hard Drive (Installed)1.800,00
Storage ControllerHP Smart Array P204i-b SR Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementIntegrated Lights-Out (iLO) Advanced
Dimensions22 x 22x 10 in
Weight20

Kysymyksiä tästä tuotteesta

Should I pick the 48 GB DDR4 option or plan for the 128 GB maximum?

The server ships with 48 GB of DDR4 ECC registered memory and supports up to 128 GB; choose the installed amount if current workloads fit, or add modules later when demand grows.

What does the 2.5 GHz Xeon Silver 4215 speed deliver in this blade?

Each 4215 runs at 2.5 GHz with eight cores and 11 MB cache, giving two processors for parallel tasks inside the blade enclosure.

How does the SAS interface and Smart Array P204i-b SR controller limit drive performance?

The two 900 GB SAS 10K drives connect through the P204i-b SR controller, capping throughput at the SAS link speed and the controller's RAID overhead.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.