Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver rack server, eight small drive bays, two processors, 256GB DDR4 memory

HPE

HPE DL160 Gen10 8SFF 2x Xeon Silver 4210 256GB DDR4 rack server

SKU CH-5BK5-F9J6G

Dual Xeon Silver 4210 2.2GHz 10-core processors, 256GB DDR4 ECC memory, Smart Array P408 SAS controller and eight 2.5" drive bays in a 160 Gen10 rack chassis

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.2GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size256GB
  • Dual Xeon Silver 4210 processors with 10 cores each for parallel workloads
  • 256GB DDR4 ECC registered memory supports virtualisation density
  • 8 SFF drive bays accept 2.5" SAS or SATA storage
  • HPE Smart Array P408 controller provides hardware RAID
  • HPE iLO Advanced enables remote server management

Rack server with dual Xeon Silver 4210

This HPE ProLiant DL160 Gen10 system arrives in an 8SFF chassis supporting up to eight 2.5-inch drives. Two Intel Xeon Silver 4210 processors at 2.2 GHz deliver 10 cores each with 13.75 MB cache. The unit ships with 256 GB of DDR4 ECC registered memory and a Smart Array P408 SAS controller. Integrated graphics and iLO Advanced remote management are included.

Suits workloads needing dense compute in a 2U

Buyers who need local storage out of the box should note that no drives are installed. Teams requiring more than two processors cannot expand beyond the pair already fitted. Workloads demanding GPU acceleration beyond integrated graphics will need a different platform.

256 GB DDR4 ECC registered memory

The installed memory uses DDR4 technology and fills part of the 2 TB maximum capacity. Confirm that your application and operating system support this memory type and capacity before deployment.

Kohokohdat

  • Dual Xeon Silver 4210 processors with 10 cores each for parallel workloads
  • 256GB DDR4 ECC registered memory supports virtualisation density
  • 8 SFF drive bays accept 2.5" SAS or SATA storage
  • HPE Smart Array P408 controller provides hardware RAID
  • HPE iLO Advanced enables remote server management

Tekniset tiedot

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.2GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size256GB
Memory TypeDDR4
Max Memory Capacity2TB
Hard Drive (Installed)3,84
Storage ControllerHPE Smart Array P408 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Kysymyksiä tästä tuotteesta

What power source is required for the two 500W Flex Slot power supplies installed in this DL160 Gen10?

Each 500W Flex Slot supply accepts standard AC input; the server ships with two hot-plug units providing redundant power for the 2x Xeon Silver 4210 processors and 256GB DDR4 memory.

Will the Smart Array P408 controller recognise my existing SATA drives if I move them into the 8SFF bays?

Yes, the P408 SAS controller supports SATA drives in the 2.5-inch bays, so current SATA media will be detected and can be configured in RAID arrays.

How do I confirm the iLO Advanced remote management is active after the firmware update?

Connect to the dedicated iLO network port, log in via browser, and the dashboard will show firmware version, system health, and the 2x 10GbE plus 2x 1GbE network adapters.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.