Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver rackmount server chassis with eight front drive bays and dual power supplies

HPE

HPE DL360 Gen9 8SFF 1x Xeon E5-2699v4 384GB DDR4 rack server

SKU CH-KCWW-HC8WZ

A 1U rack server with one 22-core Xeon E5-2699 v4 at 2.2 GHz, 384 GB DDR4 ECC memory, a P440 SAS RAID controller, dual 10 GbE and dual 1 GbE ports, iLO remote management.

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.2GHz
  • # of Processors Installed1
  • MAX Processors2
  • Installed Memory Size384GB
  • 22 cores at 2.2 GHz handle heavy workloads
  • 384 GB DDR4 ECC memory supports large datasets
  • P440 SAS controller manages up to eight 2.5-inch drives
  • Dual 10 GbE plus dual 1 GbE ports deliver high-speed connectivity
  • iLO Advanced enables remote firmware updates and monitoring

Rack server with 384 GB DDR4

The HPE DL360 Gen9 is a 1U rack-mount server populated with a single Xeon E5-2699 v4 running at 2.2 GHz across 22 cores. It ships with 384 GB of DDR4 ECC registered memory installed and a P440 SAS RAID controller. The 8SFF chassis supports up to eight 2.5-inch SATA or SAS drives, though no drives are included in this configuration.

Suited to memory-heavy workloads

This system fits virtualisation hosts, in-memory databases or compute clusters that benefit from the large 384 GB capacity and the 768 GB maximum. The dual 10 GbE and dual 1 GbE network ports provide ample bandwidth for east-west traffic. Organisations needing two processors immediately or requiring drive bays populated at delivery should consider a different starting point.

Single Xeon E5-2699 v4 installed

Only one of the two possible CPU sockets is occupied, leaving the second socket available for a future upgrade to 44 cores total. The P440 controller manages SAS and SATA drives through the eight-bay backplane. Firmware and BIOS are updated to the latest stable release before shipment.

Kohokohdat

  • 22 cores at 2.2 GHz handle heavy workloads
  • 384 GB DDR4 ECC memory supports large datasets
  • P440 SAS controller manages up to eight 2.5-inch drives
  • Dual 10 GbE plus dual 1 GbE ports deliver high-speed connectivity
  • iLO Advanced enables remote firmware updates and monitoring

Tekniset tiedot

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.2GHz
# of Processors Installed1
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity768GB
Hard Drive (Installed)3,84
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Kysymyksiä tästä tuotteesta

What are the exact dimensions of the 8SFF chassis so I can confirm it fits my rack?

The unit measures 36 x 24 x 10 in and weighs 40, matching a standard 1U depth profile for four-post racks.

Which steps are required to install the second Xeon processor and avoid the common firmware mismatch?

Install the second E5-2699 v4 in socket 2, populate matching DDR4 DIMMs, then run the iLO firmware update before first boot so both CPUs report identical microcode.

When should I plan to replace the two 500 W Flex Slot power supplies in this server?

HPE rates the 500 W Flex Slot units for several years of continuous operation; monitor iLO power-health alerts and swap a supply when it reports a degraded or predictive-failure state.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.