Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2U rack server, four 3.5-inch drive bays, front panel blank, rail handles visible

HPE

HPE DL380 Gen9 4LFF 2x Xeon E5-2650 v3 384GB DDR4 rack server

SKU CH-2F8Q-6EK8Y

A 2U rack server with dual 10-core Xeon processors at 2.3 GHz, 384 GB DDR4 memory, a P440 SAS controller and four 3.5-inch drive bays ready for SATA storage

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.3GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size384GB
  • Dual 10-core Xeon E5-2650 v3 CPUs deliver 20 threads at 2.3GHz for parallel workloads
  • 384GB DDR4 ECC registered memory supports large datasets and virtualization density
  • HPE Smart Array P440 SAS controller enables hardware RAID across four 3.5-inch drive bays
  • HPE iLO Advanced remote management provides out-of-band monitoring and firmware updates
  • Redundant 500W Flex Slot power supplies maintain uptime during single-module failure

HPE DL380 Gen9 4LFF dual Xeon server

This 2U rackmount server ships with two Intel Xeon E5-2650 v3 processors running at 2.3 GHz and 384 GB of DDR4 ECC registered memory. The chassis provides four 3.5-inch drive bays and includes an HPE Smart Array P440 SAS controller with 2 GB flash-backed write cache. Integrated 1 Gb dual-port networking and dual 500 W Flex Slot power supplies complete the base configuration.

Ideal for virtualisation

The 384 GB capacity suits workloads that benefit from large in-memory datasets, while the ten-core processors deliver strong multi-thread throughput. Buyers who need more than 3 TB total system memory or who require drive interfaces beyond SAS and SATA should evaluate other platforms. The unit arrives with firmware updated and no drives installed, so storage must be sourced separately.

Maximum memory capacity of 3 TB

The motherboard supports up to 3 TB of DDR4 across 24 DIMM slots when both processor sockets are populated. This ceiling determines whether the platform can grow with future dataset expansion or if a higher-capacity chassis is required from the outset.

Kohokohdat

  • Dual 10-core Xeon E5-2650 v3 CPUs deliver 20 threads at 2.3GHz for parallel workloads
  • 384GB DDR4 ECC registered memory supports large datasets and virtualization density
  • HPE Smart Array P440 SAS controller enables hardware RAID across four 3.5-inch drive bays
  • HPE iLO Advanced remote management provides out-of-band monitoring and firmware updates
  • Redundant 500W Flex Slot power supplies maintain uptime during single-module failure

Tekniset tiedot

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.3GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)2,00
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Kysymyksiä tästä tuotteesta

How loud and hot does the 500W dual power supply run under continuous load?

Two 500W Flex Slot supplies share the load, keeping fan speeds lower than a single unit would need. The 36 x 24 x 10 in chassis provides ample airflow path, so inlet temperatures stay within spec even during 24-hour compute runs.

Which drive trays and cables must I supply to populate the four 3.5-inch bays?

The 4LFF chassis ships with empty hot-plug bays and a P440 SAS controller. You need 3.5-inch SATA or SAS drive carriers compatible with Gen9, plus matching data cables if they are not already fitted in the backplane.

Will the 2.3GHz 10-core processors and DDR4 ECC memory work with my existing SAS storage array?

The P440 controller presents standard SAS connectivity, so legacy SAS arrays attach directly. The 2x E5-2650 v3 CPUs and 384GB DDR4 ECC registered DIMMs maintain full backward compatibility with older HPE storage enclosures.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.