Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver rack-mount server chassis with four 3.5-inch drive bays and front panel controls

HPE

HPE DL380 Gen9 4LFF 2x Xeon E5-2650 v3 768GB RAM rack server

SKU CH-92JZ-6E8D5

Rack server with two 10-core Xeon processors at 2.3 GHz, 768 GB DDR4 ECC memory, a P440 SAS controller and four 3.5-inch drive bays

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.3GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size768GB
  • Dual 10-core Xeon E5-2650 v3 CPUs run at 2.3GHz
  • 768GB DDR4 ECC registered memory supports heavy workloads
  • HPE Smart Array P440 SAS controller manages up to four 3.5-inch drives
  • Dual 500W Flex Slot power supplies provide redundancy
  • HPE iLO Advanced remote management enables full control

Dual Xeon E5-2650 v3 10-core processors

This rack server ships with two Intel Xeon E5-2650 v3 CPUs running at 2.3 GHz. Each processor provides ten cores and 25 MB of cache for a total of twenty cores. The configuration targets virtualisation hosts, database nodes and compute clusters that need strong multi-threaded throughput.

768 GB DDR4 ECC registered memory

The system arrives with 768 GB of DDR4 ECC registered RAM installed across the available DIMM slots. The platform supports a maximum of 3 TB so the current capacity leaves room for future expansion. Buyers who need the full 3 TB limit from day one will need to add modules before deployment.

HPE Smart Array P440 SAS controller

Storage is handled by an HPE Smart Array P440 PCIe SAS controller connected to four 3.5-inch large-form-factor drive bays. The chassis accepts SATA hard drives or SSDs which are not included. The integrated 1 GbE 332T dual-port adapter and iLO Advanced remote management provide network and out-of-band access without extra cards.

Kohokohdat

  • Dual 10-core Xeon E5-2650 v3 CPUs run at 2.3GHz
  • 768GB DDR4 ECC registered memory supports heavy workloads
  • HPE Smart Array P440 SAS controller manages up to four 3.5-inch drives
  • Dual 500W Flex Slot power supplies provide redundancy
  • HPE iLO Advanced remote management enables full control

Tekniset tiedot

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.3GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size768GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)8,00
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Kysymyksiä tästä tuotteesta

What rack depth is needed for the 36-inch deep chassis?

The server is 36 inches deep, so a rack with at least 36 inches of usable depth and adjustable rails is required for proper mounting and cable clearance.

How are the two 500W Flex Slot power supplies installed, and what step is often missed?

Slide each supply into the rear bays until the latch clicks, then connect both to separate PDU circuits; forgetting the second feed leaves the system without redundancy.

When the installed 768GB DDR4 ECC Registered memory reaches its limit, what is the maximum capacity and module type for expansion?

The board supports up to 3TB using DDR4 ECC Registered DIMMs; populate remaining slots in matched pairs per processor to maintain performance.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.