Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
HPE DL380 Gen9 rack server, 4LFF chassis, silver front bezel, two processors, 768GB DDR4 memory, no drives installed

HPE

HPE DL380 Gen9 4LFF 2x Xeon E5-2698 v4 768GB DDR4 rack server

SKU CH-ZVXM-AR70Y

A 2U rack server with dual Xeon E5-2698 v4 processors, 768GB DDR4 memory and a P440 SAS controller supporting four 3.5-inch drive bays

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.2GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size768GB
  • Dual Xeon E5-2698 v4 20-core CPUs deliver 40 threads at 2.2 GHz
  • 768 GB DDR4 ECC registered memory supports demanding virtualization workloads
  • HPE Smart Array P440 SAS controller enables flexible RAID arrays
  • Four 3.5-inch LFF drive bays ready for SATA storage expansion
  • HPE iLO Advanced remote management provides full out-of-band server control

HPE DL380 Gen9 4LFF dual Xeon server

The HPE DL380 Gen9 4LFF chassis holds two Xeon E5-2698 v4 processors running at 2.2 GHz and 768 GB of DDR4 ECC registered memory. A Smart Array P440 SAS controller and dual 500 W Flex Slot power supplies are installed. The unit ships with firmware updated and no drives fitted.

Suits virtualisation hosts

This configuration suits workloads that need high core counts and large memory capacity within a four-bay 3.5-inch chassis. Buyers who need more than four local drive bays or require a different drive interface should look at a different platform.

Four-bay 3.5-inch LFF chassis limit

The 4LFF chassis accepts a maximum of four 3.5-inch SATA or SAS drives. This physical bay count is the single specification that decides whether the server can meet your local storage requirements.

Kohokohdat

  • Dual Xeon E5-2698 v4 20-core CPUs deliver 40 threads at 2.2 GHz
  • 768 GB DDR4 ECC registered memory supports demanding virtualization workloads
  • HPE Smart Array P440 SAS controller enables flexible RAID arrays
  • Four 3.5-inch LFF drive bays ready for SATA storage expansion
  • HPE iLO Advanced remote management provides full out-of-band server control

Tekniset tiedot

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.2GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size768GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)8,00
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Kysymyksiä tästä tuotteesta

What power supply capacity do I need already installed to run the two Xeon E5-2698 v4 processors and 768GB of DDR4?

The server ships with two 500W Flex Slot power supplies, so no additional units are required for the installed configuration.

Will my existing 3.5-inch SATA drives connect to the P440 SAS controller in the 4LFF chassis?

Yes, the P440 PCIe SAS controller supports SATA drives in the four 3.5-inch bays.

How can I verify the iLO remote management is active after the firmware update?

Connect the dedicated iLO port, power on the server, and access the iLO web interface at the displayed IP address to confirm remote control functions.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.