Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

HPE

HPE MSA 2070 SAN Storage System 24-Bay 2U Rack Mount

SKU CH-R699-S7B2S

A 2U rack-mount SAN storage system with 24 drive bays, dual 12Gb/s SAS controllers and RAID support

  • 24 drive bays let you scale capacity with HDDs or SSDs
  • Dual 12Gb/s SAS controllers provide redundant data paths
  • RAID 0, 1, 5, 6, 10 protects data against drive failure
  • Clustering support enables high-availability storage pools
  • Two 580 W redundant power supplies keep the system running during a power-module fault

HPE MSA 2070 24-Bay SAN Array

The HPE MSA 2070 is a 2U rack-mountable SAN storage system designed for organisations that need consolidated block storage with dual-controller redundancy. It supports up to 24 drives, accepting both 2.5-inch HDDs and SSDs, and ships with zero drives installed so you can populate it to match capacity and performance targets.

Dual 12Gb/s SAS controllers with four external ports

Two 12Gb/s SAS controllers provide active-active failover and four external SAS ports for host connectivity. The chassis includes two redundant 580 W power supplies with C14 connectors. Installation is straightforward in a standard rack, but you must source and install all drives and configure RAID 0, 1, 5, 6 or 10 before the array can serve data.

Sustained throughput with clustering and remote

Under continuous workloads the dual-controller design balances I/O across both nodes, and clustering support lets you scale out by adding a second system. Management runs over Gigabit Ethernet using SNMP, SSH, HTTPS, SFTP and other standard protocols, giving administrators scriptable control during extended operations without relying on a single point of failure.

Kohokohdat

  • 24 drive bays let you scale capacity with HDDs or SSDs
  • Dual 12Gb/s SAS controllers provide redundant data paths
  • RAID 0, 1, 5, 6, 10 protects data against drive failure
  • Clustering support enables high-availability storage pools
  • Two 580 W redundant power supplies keep the system running during a power-module fault

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

How can I verify the two 12Gb/s SAS controllers are active after racking the 2U MSA 2070?

Check the management interface over HTTPS or SSH; both controllers should show online status and the four external SAS ports should report link-up when host cables are connected.

What ships with the S1H48A and what must I order separately?

The chassis includes two 580 W redundant power supplies with C14 connectors and twenty-four empty 2.5" bays; drives, SAS host cables and rail kit are not included.

Which drive mix should I choose for the 24-bay MSA 2070?

All twenty-four bays accept 2.5" HDDs or SSDs in any combination; select capacity and SSD count based on the RAID level — 0, 1, 5, 6 or 10 — required for your workload.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.