Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5-inch SATA hard drive with green circuit board visible

HPE

HPE P23449-B21 16 TB 3.5" 7200 RPM SATA internal hard drive

SKU CH-A4H8-54E4R MPN P23449-B21

A 16 TB 3.5" SATA hard drive spinning at 7200 RPM for server and storage system workloads

  • InterfaceSATA 6.0Gb/s
  • Capacity16TB
  • NAND Flash Memory TypeSLC
  • RPM7200 RPM
  • 16 TB capacity stores large datasets
  • 7200 RPM spindle speed enables fast sequential access
  • SATA 6.0Gb/s interface connects to standard controllers
  • 5-inch form factor fits LFF server bays
  • Digitally signed firmware protects against unauthorized access

Capacity and interface

This HPE 16 TB hard drive uses a 3.5 inch form factor and a SATA 6.0Gb/s interface. It spins at 7200 RPM and is built for server and storage system installations. The drive suits administrators who need large single-volume capacity on a standard SATA backplane.

Build integration

The drive fits a 3.5 inch drive bay and connects with a standard SATA data and power cable. No special controller or caddy beyond what the host chassis provides is required. It frees additional bays by consolidating data that would otherwise need multiple smaller drives.

Sustained workload behaviour

The 7200 RPM spindle and SATA 6.0Gb/s link deliver steady throughput for continuous read and write streams. Digitally signed firmware helps maintain data integrity during long operations. The drive is qualified for HPE server and storage environments where sustained I/O is expected.

Kohokohdat

  • 16 TB capacity stores large datasets
  • 7200 RPM spindle speed enables fast sequential access
  • SATA 6.0Gb/s interface connects to standard controllers
  • 5-inch form factor fits LFF server bays
  • Digitally signed firmware protects against unauthorized access

Tekniset tiedot

BrandHPE
InterfaceSATA 6.0Gb/s
Capacity16TB
NAND Flash Memory TypeSLC
RPM7200 RPM
Lähetyspaino1.02 kg
Pakkauksen mitat269 × 229 × 140 mm

Kysymyksiä tästä tuotteesta

What is the sustained transfer limit of the 16 TB 7200 RPM SATA drive under continuous workloads?

The 6.0 Gb/s SATA interface sets the maximum sustained transfer rate for the 16 TB drive during continuous workloads.

How much heat and noise does the 3.5 inch 7200 RPM mechanism produce during continuous operation?

The 3.5 inch 7200 RPM mechanism generates typical enterprise-level heat and acoustic output for sustained operation in server and storage chassis.

Which drive bay and caddy are required to install this 3.5 inch SATA drive in a server?

A 3.5 inch LFF drive bay with a compatible HPE caddy is required to mount the SATA drive in supported servers and storage systems.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.