Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green printed circuit board with black heat spreader, 288-pin DDR5 DIMM module

HPE

HPE P43328-B21 32GB DDR5-4800 server RAM

SKU CH-5WW5-V6K6Q MPN P43328-B21

32 GB DDR5-4800 registered dual-rank DIMM running at 1.10 V with CL40 latency for server, rack and blade platforms

  • Capacity32GB
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • BIOS/Performance ProfileIntel XMP 3.0
  • ColorBlack/Green
  • 32 GB DDR5-4800 capacity for high-density server workloads
  • Dual-rank 4800 MT/s speed increases memory bandwidth over DDR4 3200 MT/s
  • Registered 288-pin DIMM adds signal integrity for rack and blade servers
  • 10 V operation lowers power draw per module
  • Intel XMP 3.0 profile enables automatic performance tuning

HPE DDR5-4800 Registered DIMM

This 32 GB HPE P43328-B21 module is built for server, rack and blade platforms that require registered DDR5 memory. It targets administrators expanding capacity in enterprise environments where data integrity and sustained uptime are priorities.

Thermals and power efficiency

Operating at 1.10 V, the dual-rank DIMM is designed for lower power draw than previous DDR4 3200 MT/s modules. HPE qualification selects high-quality DRAM to maintain stability without excessive heat in dense chassis configurations.

Sustained load behaviour

Under continuous workloads such as virtualization or large databases, the registered signal buffering and CL40 latency help maintain consistent throughput at 4800 MT/s. Rigorous testing unlocks platform-specific performance features available only with HPE servers.

Kohokohdat

  • 32 GB DDR5-4800 capacity for high-density server workloads
  • Dual-rank 4800 MT/s speed increases memory bandwidth over DDR4 3200 MT/s
  • Registered 288-pin DIMM adds signal integrity for rack and blade servers
  • 10 V operation lowers power draw per module
  • Intel XMP 3.0 profile enables automatic performance tuning

Tekniset tiedot

BrandHPE
Capacity32GB
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
BIOS/Performance ProfileIntel XMP 3.0
ColorBlack/Green
Lähetyspaino0.05 kg
Pakkauksen mitat168 × 64 × 15 mm

Kysymyksiä tästä tuotteesta

How is the 288-pin DDR5 DIMM installed, and what step is often missed?

Align the notch with the slot key, press firmly until both retention clips click, then verify the module is seated evenly; the step often missed is confirming both clips lock simultaneously.

What maintenance or replacement will the 32GB dual-rank module need later?

No routine maintenance is required; replacement is only needed if a memory error appears or capacity must be increased beyond 32GB.

What limit appears first under sustained load with 1.10V DDR5-4800 CL40 memory?

Thermal throttling from the memory controller typically limits sustained throughput before the module reaches its rated voltage or latency ceiling.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.