Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 1U rack server front with eight 2.5 inch drive bays

HPE

HPE ProLiant DL360 Gen10 8SFF 2x Xeon 6130 384GB DDR4 rack server

SKU CH-RT9V-V3MWR

Dual Xeon 6130 2.1GHz 16-core processors and 384GB DDR4 with P408 SAS controller in an 8-bay 1U rack server

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.1GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size384GB
  • Dual Xeon 6130 processors provide 16 cores each at 2.1GHz
  • 384GB DDR4 ECC registered memory supports demanding workloads
  • HPE Smart Array P408 SAS controller manages up to 8 SFF drive bays
  • Dual 500W flex-slot power supplies deliver redundant power
  • HPE iLO Advanced enables remote server management

ProLiant DL360 Gen10 8SFF server

The HPE ProLiant DL360 Gen10 is a 1U rack server built for dense compute workloads. It ships with two Intel Xeon 6130 processors running at 2.1GHz and 384GB of DDR4 ECC registered memory. Eight 2.5-inch drive bays and a Smart Array P408 SAS controller provide flexible storage options. Integrated iLO Advanced enables full remote management.

Suited for virtualisation and database nodes

This configuration fits organisations that need high core counts and large memory capacity in a single rack unit. The dual 16-core processors and 384GB of RAM support heavy consolidation ratios. Buyers who require internal storage out of the box should note that no drives are installed. Workloads needing GPU acceleration or more than two sockets will need a different platform.

Dual Xeon 6130 at 2.1GHz with 384GB DDR4

The two Xeon 6130 CPUs deliver 16 cores each with 22MB cache per processor. Memory scales to 3TB across 24 DIMM slots using DDR4 technology. Dual 500W power supplies and an Intel I350/X540 network card with two 10GbE and two 1GbE ports complete the core specification.

Kohokohdat

  • Dual Xeon 6130 processors provide 16 cores each at 2.1GHz
  • 384GB DDR4 ECC registered memory supports demanding workloads
  • HPE Smart Array P408 SAS controller manages up to 8 SFF drive bays
  • Dual 500W flex-slot power supplies deliver redundant power
  • HPE iLO Advanced enables remote server management

Tekniset tiedot

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.1GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)8,00
Storage ControllerHPE Smart Array P408 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Kysymyksiä tästä tuotteesta

Will the 384 GB of DDR4 ECC Registered memory need to be upgraded for heavier workloads?

The system supports up to 3 TB of DDR4, so the installed 384 GB can be expanded later if applications demand more capacity.

Which component is likely to limit sustained performance first with the dual Xeon 6130 processors?

The 2.1 GHz base frequency and 16 cores per CPU set the compute ceiling; memory bandwidth and the P408 SAS controller throughput will saturate before the CPUs reach thermal limits.

How much heat and noise should I expect from the two 500 W Flex Slot power supplies running continuously?

Dual 500 W supplies provide redundancy and share load, keeping fan speeds moderate; typical idle draw is well below 500 W, so acoustic output stays low in a rack environment.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.