Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

HPE

HPE ProLiant DL360 Gen10 8SFF 2x Xeon Bronze 3204 384GB DDR4 rack server

SKU CH-6PGJ-7T1R9

Dual Xeon Bronze 3204 processors with 384GB DDR4 memory and Smart Array P408 SAS controller in an 8-bay 1U rack server

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed1.9GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size384GB
  • Dual Xeon Bronze 3204 CPUs provide 6 cores each at 1.9GHz
  • 384GB DDR4 ECC registered memory supports large workloads
  • HPE Smart Array P408 SAS controller manages storage arrays
  • Integrated Intel I350/X540 network adapters deliver 10GbE and 1GbE connectivity
  • HPE iLO Advanced remote management enables out-of-band server control

Compact dual-socket rack server

The HPE ProLiant DL360 Gen10 fits in a 1U chassis and supports up to eight 2.5-inch drive bays. Two Xeon Bronze 3204 processors run at 1.9 GHz with six cores each. 384 GB of DDR4 ECC registered memory is installed. A Smart Array P408 SAS controller manages storage connectivity.

Suits memory-intensive virtualisation

This configuration targets workloads that benefit from large memory capacity and dual-processor throughput. Buyers who require pre-installed drives, GPU acceleration, or a single-socket design with lower licensing overhead should evaluate alternative form factors. The 3 TB maximum memory ceiling allows future expansion without replacing the platform.

384 GB DDR4 ECC registered memory installed

This single specification determines whether the server meets immediate capacity needs for dense virtualisation or in-memory databases. The eight drive bays and P408 controller provide flexible SAS storage options, but no drives ship with the unit. Organisations that need a different memory footprint should request a custom configuration.

Kohokohdat

  • Dual Xeon Bronze 3204 CPUs provide 6 cores each at 1.9GHz
  • 384GB DDR4 ECC registered memory supports large workloads
  • HPE Smart Array P408 SAS controller manages storage arrays
  • Integrated Intel I350/X540 network adapters deliver 10GbE and 1GbE connectivity
  • HPE iLO Advanced remote management enables out-of-band server control

Tekniset tiedot

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed1.9GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)2.400,00
Storage ControllerHPE Smart Array P408 SAS Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Kysymyksiä tästä tuotteesta

How can I verify the server is working correctly after initial setup?

Access HPE iLO Advanced remote management to review system health logs and confirm both Xeon Bronze 3204 processors and 384GB DDR4 memory are detected without errors.

What components are included and what must be purchased separately?

The unit ships with 2x Xeon Bronze 3204 CPUs, 384GB DDR4 ECC Registered RAM, Smart Array P408 controller, 2x 500W power supplies, and Intel I350/X540 network card; 2.5" SAS drives and rail kit are not installed.

Which memory capacity should I choose for this DL360 Gen10 configuration?

This build already provides 384GB DDR4 installed; the platform supports up to 3TB total, so select additional DDR4 ECC Registered modules only if your workload exceeds the current 384GB.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.