Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2U rack server chassis with front drive bays and sliding rail kit

HPE

HPE ProLiant DL380 Gen10 2U Rack Server Bundle Dual Xeon 6148 2.40 GHz 512GB 61.44TB Rail Kit

SKU CH-E88D-XGCTY

A 2U rack server with dual 20-core Xeon processors, 512GB DDR4 memory, 61.44TB enterprise SSD storage, redundant power and iLO 5 management

  • TypeRack
  • Dual 20-Core Xeon 6148 CPUs deliver high parallel compute for heavy workloads
  • 512GB DDR4 3200MHz memory supports large virtualisation and database footprints
  • 44TB enterprise SATA SSD array provides massive low-latency storage capacity
  • Redundant power supplies keep critical applications running during a module failure
  • HPE iLO 5 remote management enables full out-of-band server control

Enterprise 2U Rack Server

The HPE ProLiant DL380 Gen10 is a 2U rackmount server system built for enterprise workloads such as databases and virtualisation. It ships with dual Xeon Gold 6148 20-core processors running at 2.40 GHz with turbo up to 3.70 GHz. The bundle includes 512GB of DDR4 memory and 61.44TB of enterprise SATA SSD storage. A rail kit is supplied for rack installation.

Installation Requirements

Hard drives and memory upgrades are included separately and not installed, so assembly is required before deployment. The chassis supports hot-swappable redundant power supplies, allowing a faulty unit to be replaced without taking the server offline. Remote management is provided through integrated iLO 5 for out-of-band access and monitoring.

Sustained Load Behaviour

Dual processors and large memory capacity enable the system to maintain performance during extended, demanding workloads. Enterprise-grade SSDs and the P408i-a storage controller with Smart Storage Battery are designed for continuous read and write operations. Redundant power and 10Gb Ethernet connectivity support uninterrupted operation under heavy utilisation.

Kohokohdat

  • Dual 20-Core Xeon 6148 CPUs deliver high parallel compute for heavy workloads
  • 512GB DDR4 3200MHz memory supports large virtualisation and database footprints
  • 44TB enterprise SATA SSD array provides massive low-latency storage capacity
  • Redundant power supplies keep critical applications running during a module failure
  • HPE iLO 5 remote management enables full out-of-band server control

Tekniset tiedot

TypeRack

Kysymyksiä tästä tuotteesta

How do I confirm the dual Xeon 6148 CPUs and 512GB DDR4 are recognised after installation?

Power on the server and watch the POST screen; it will list both 20-core 2.40 GHz processors and show 512GB across 16 DIMM slots at 3200MHz. iLO 5 also reports CPU and memory health remotely.

Which components ship inside the chassis versus loose in the bundle?

The 2U chassis includes the P408i-a/2GB controller, Broadcom 57416 10Gb dual-port OCP3 adapter, redundant power supplies and rail kit. The 16 memory modules and eight 7.68TB SATA SSDs are packaged separately for you to install.

Should I choose the 61.44TB SSD bundle or a smaller capacity for mixed workloads?

The bundle provides eight 7.68TB enterprise SATA SSDs totalling 61.44TB. If your working set fits in less space, you can populate fewer bays now and add drives later using the same 2.5-inch SATA form factor.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.