Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2U rack server chassis with front drive bays and dual power supplies

HPE

HPE ProLiant DL380 Gen10 2x Xeon Gold 6138 128GB DDR4 rack server

SKU CH-MERJ-YPR43

A 2U rack server with dual Xeon Gold 6138 processors, 128GB DDR4 ECC memory, a Smart Array P408 SAS controller, and dual 500W power supplies — drives not included

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size128GB
  • Dual 20-core Xeon Gold 6138 CPUs deliver high parallel throughput
  • 128 GB DDR4 ECC registered memory supports large working sets
  • HPE Smart Array P408 SAS controller enables flexible RAID storage
  • Dual 500 W Flex Slot power supplies provide redundancy
  • HPE iLO Advanced remote management allows out-of-band control

Dual Xeon Gold 6138 server for virtualisation

The HPE ProLiant DL380 Gen10 ships with two Intel Xeon Gold 6138 processors running at 2.0 GHz, each providing 20 cores and 27.5 MB cache. A total of 128 GB DDR4 ECC registered memory is installed across the memory slots. The chassis supports up to eight 2.5-inch drive bays and includes an HPE Smart Array P408 SAS controller for RAID management. Remote administration is handled by HPE iLO Advanced with firmware updated to the latest stable version.

Sustained multi-threaded compute

Under continuous load the dual 20-core CPUs deliver 40 threads for parallel workloads such as virtualisation clusters or database engines. The integrated Intel I350 and X540 adapters provide two 10 GbE and two 1 GbE network ports for storage and management traffic separation. Two 500 W Flex Slot power supplies operate in redundant mode to maintain uptime during a single unit failure. BIOS and firmware are refreshed before dispatch and a full burn-in test verifies thermal stability.

Verify rack depth drive caddies

The unit measures 36 by 24 by 10 inches and weighs 40 pounds, so confirm your rack depth and weight capacity accommodate the chassis. No drives or drive caddies are included; you must supply compatible 2.5-inch SATA or SAS media and the correct carrier trays for the eight-bay backplane. A rail kit is available on request but does not ship by default. The server arrives with 128 GB DDR4 only; maximum supported memory is 3 TB if future expansion is planned.

Kohokohdat

  • Dual 20-core Xeon Gold 6138 CPUs deliver high parallel throughput
  • 128 GB DDR4 ECC registered memory supports large working sets
  • HPE Smart Array P408 SAS controller enables flexible RAID storage
  • Dual 500 W Flex Slot power supplies provide redundancy
  • HPE iLO Advanced remote management allows out-of-band control

Tekniset tiedot

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size128GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)20,00
Storage ControllerHPE Smart Array P408 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Kysymyksiä tästä tuotteesta

How much heat and noise do the two 500 W power supplies and dual Xeon Gold 6138 CPUs generate during continuous 24/7 operation?

The chassis uses dual 500 W Flex Slot supplies with redundant cooling; under full load the CPUs run at 2.0 GHz across 40 cores total, so fan speed and exhaust temperature rise accordingly.

Which drive bays and caddies must I already have to populate the 2.5-inch slots served by the Smart Array P408 controller?

The server supports up to eight 2.5-inch SATA or SAS bays; you need compatible hot-plug drive carriers and SATA or SAS drives to use the P408 controller.

Will my existing DDR4 ECC registered modules work alongside the installed 128 GB without voltage or rank conflicts?

The system accepts DDR4 ECC registered memory up to 3 TB across 24 slots; matching speed and rank to the factory 128 GB ensures stable operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.