Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2U rack server, matte black front bezel, eight 2.5 inch drive bays, single power supply visible

HPE

HPE ProLiant DL380 Gen10 rack server Xeon Silver 4210 256GB DDR4 no drive

SKU CH-FNBY-4S6Y6

2U rack server with one 10-core Xeon Silver 4210 at 2.2 GHz, 256 GB DDR4 ECC, Smart Array P408 SAS controller, dual 10 GbE and dual 1 GbE networking, dual 500 W power supplies.

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.2GHz
  • # of Processors Installed1
  • MAX Processors2
  • Installed Memory Size256GB
  • 10-core Xeon Silver 4210 at 2.2 GHz handles heavy workloads
  • 256 GB DDR4 ECC memory supports large datasets
  • Smart Array P408 SAS controller manages RAID arrays
  • Dual 500 W power supplies provide redundancy
  • iLO Advanced enables remote server management

ProLiant DL380 Gen10 2U rack server

The HPE ProLiant DL380 Gen10 is a 2U rack server built for virtualization, database and general compute workloads. It ships with one Intel Xeon Silver 4210 processor at 2.2 GHz and 256 GB of DDR4 ECC registered memory. No drives are installed, so storage can be matched to the application.

Installation notes and common issues

The chassis accepts up to eight 2.5 inch drive bays and a second processor for expansion. The Smart Array P408 SAS controller manages SATA or SAS devices and requires firmware alignment with the backplane before array creation. Rail kits are optional and must be ordered separately if not already in the rack.

Sustained-load behaviour

Dual 500 W Flex Slot power supplies provide redundancy during continuous operation. The iLO Advanced remote management console monitors thermal sensors and fan curves while the system runs at full capacity. Memory bandwidth scales with the installed DDR4 modules and the single 10-core processor.

Kohokohdat

  • 10-core Xeon Silver 4210 at 2.2 GHz handles heavy workloads
  • 256 GB DDR4 ECC memory supports large datasets
  • Smart Array P408 SAS controller manages RAID arrays
  • Dual 500 W power supplies provide redundancy
  • iLO Advanced enables remote server management

Tekniset tiedot

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.2GHz
# of Processors Installed1
MAX Processors2
Installed Memory Size256GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)7,68
Storage ControllerHPE Smart Array P408 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Kysymyksiä tästä tuotteesta

How do I confirm the HPE iLO Advanced remote management is responding after power-on?

Connect the dedicated iLO network port, log in via browser, and verify the firmware version shown matches the latest stable release applied during burn-in testing.

What components are already installed and which drive parts must be purchased separately?

The chassis includes one Xeon Silver 4210 processor, 256 GB DDR4 ECC registered memory, a Smart Array P408 SAS controller, two 500 W Flex Slot power supplies, and an Intel I350/X540 quad-port network card; no 2.5-inch drives or drive caddies are installed.

Which memory capacity should I choose if I need room to expand beyond the installed 256 GB?

The system board supports up to 3 TB of DDR4 ECC registered memory, so select a configuration that leaves free DIMM slots for future modules rather than filling every slot now.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.