Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2U rack server with front drive bays and rail kit

HPE

HPE ProLiant DL380 Gen11 2U Rack Server Dual Xeon 4410y 12-Core 2.00GHz 256GB 30.72TB SAS

SKU CH-GQDE-9A9N4

A 2U rack server with dual 12-core Xeon processors at 2.00 GHz, 256 GB DDR5 memory, 30.72 TB SAS storage, redundant power, iLO 6 management and Windows Server 2022 Standard

  • Dual 12-core Xeon 4410y processors reach 3.90 GHz turbo for heavy workloads
  • 256 GB DDR5-4800 ECC memory scales virtualization and database performance
  • 72 TB enterprise SAS SSD storage delivers ultra-fast data access
  • Redundant hot-swap power supplies keep the server running during a failure
  • iLO 6 remote management enables secure provisioning and monitoring from anywhere

HPE ProLiant DL380 Gen11 2U Server

The HPE ProLiant DL380 Gen11 is a 2U rack server built for hybrid environments. It ships with dual Xeon Silver 4410y 12-core processors running at 2.00 GHz with up to 3.90 GHz turbo. The system includes 256 GB of DDR5-4800 ECC buffered memory across eight 32 GB modules. Storage consists of four 7.68 TB enterprise SAS 12 Gb/s SSDs totalling 30.72 TB. Windows Server 2022 Standard 16-core licence is included.

Suits virtualisation and database workloads

This server suits organisations running virtualised workloads, databases or multiple simultaneous applications that benefit from dual-socket Xeon performance and large DDR5 memory capacity. The hot-swappable redundant power supplies and iLO 6 remote management support continuous operation. Buyers who need GPU acceleration or a tower form factor should look elsewhere. The memory and drives are supplied separately and require installation before use.

30.72 TB SAS SSD capacity decides fit

The single specification that decides fit is the 30.72 TB of enterprise SAS storage delivered on four 2.5-inch 7.68 TB SSDs behind an MR408i-o Gen11 controller with 4 GB cache. This capacity and the SAS 12 Gb/s interface determine whether the server matches the storage performance and density the workload requires.

Kohokohdat

  • Dual 12-core Xeon 4410y processors reach 3.90 GHz turbo for heavy workloads
  • 256 GB DDR5-4800 ECC memory scales virtualization and database performance
  • 72 TB enterprise SAS SSD storage delivers ultra-fast data access
  • Redundant hot-swap power supplies keep the server running during a failure
  • iLO 6 remote management enables secure provisioning and monitoring from anywhere

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

What rail kit is included for mounting this 2U server in a rack?

The bundle includes an HPE rail kit for the 2U chassis; extend the rails, lock them to the front and rear posts, then slide the server in until the latches click.

Which steps are required to install the memory and drives that ship separately?

Power down, open the top cover, seat the eight 32 GB DDR5 modules in the labelled slots, insert the four 7.68 TB SAS SSDs into the front bays, then cable the MR408i-o controller.

Which field-replaceable parts will need attention over the life of this server?

Hot-swap power supplies and the four SAS SSDs can be replaced without downtime; DDR5 DIMMs and the OCP3 network adapter require a shutdown to service.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.